Aqua Lung BC 1 User Manual page 13

3. Push the lever forward until it stops in
the pre-locked position.
NOTE: The pre-locked position ensures your fingers do not get
caught in the lever.
4. Push the lever down into the locked
position. Verify the lever is secured in the
locked position. Once the cylinder band
is set up, further adjustment is typically not
needed.
5. Check that the cylinder band is secure by pulling on the band while holding
down the cylinder at the valve. If the cylinder band moves, it is too loose. Check
that the macro adjustment is set for the correct size cylinder. Repeat steps 1-4 to
tighten and secure the cylinder band.
WARNING:
dive. Failure to do so may result in the cylinder slipping during
the course of a dive.
Verify the tension of the cylinder band prior to every
13