Table of Contents
Advertisement
Direct Channel Tuning
Channels may be tuned directly by entering the channel number using the 0—9 buttons on the
vehicle dock when the dock is in the tune mode. The Stiletto 10 must be in the Satellite mode
to select channels. To directly tune a channel:
1.
Press the
tune
light will indicate that the tune mode is active.
2.
Enter the channel number of the desired channel. If a 3-digit channel number is entered,
the channel will be tuned immediately. If only one or two digits are entered, the channel
will be tuned after a slight pause. (Figure 16)
[
0
Vehicle Docking Station Installation & Use
Tune button on the vehicle dock. (Figure 15) The tune mode indicator
Direct
Tune
Enter channel #
figure 15
figure 15
26
figure 16
figure 16
]
Advertisement
Table of Contents
