Table of Contents
Advertisement
Direct Tuning
Channels can be directly accessed by pressing and releasing the Rotary Knob and then
using the 0–9 keys to enter the desired channel number. (Figure 5) Once the desired number
has been entered, the channel will change and the display will revert to the default screen
for the selected channel. The radio will tune the channel immediately if three numbers are
entered (for example, "0", "0", "7"), but if just one or two digits are entered, the radio will tune
to the new channel after three seconds.
Channel Presets
Channel presets allow you to store up to 30 of your favorite channels as presets for quick
access with the press of a button.
Setting Channel Presets
Presets are stored in three banks, A, B, and C, each containing 10 channel presets.
Press the BAND button to activate the preset bank you want. The selected bank is
1.
shown in the lower right corner of the Default display screen.
2.
Select the channel you want to preset.
3.
Press and hold for two seconds the numbered preset button (0–9) in which you want to
store the channel.
4.
The selected preset number will flash and then remain lit on the display to show that it
has been memorized.
If the preset button you selected already has a channel stored in it, the preset will be replaced
figure 5
figure 5
[
]
Operation
Advertisement
Table of Contents
