Table of Contents
Advertisement
My Sirius Studio Software Installation
The My Sirius Studio software included with your Stiletto 10 allows you to connect your
Stiletto 10 to your PC computer. The software requires your PC computer to be using the
Microsoft Windows XP operating system with Service Pack 2 installed.
Periodically connecting the Stiletto 10 to your PC computer will insure that your Stiletto has
the latest device software updates. If a software update is available, it will be automatically
loaded to your Stiletto when connected.
The software may also be used to stream SIRIUS music channels over the Internet.
important: The My Sirius Studio software must be installed before connecting the Stiletto
10 to your PC computer.
To install the My Sirius Studio software:
1.
Place the My Sirius Studio software CD-ROM into your PC computer's CD-ROM drive to
start the software installation.
2.
If the installation does not begin automatically, double click the SiriusStudioSetup icon
to begin the installation.
3.
Follow the prompts of the software to complete the installation.
When the PC computer has rebooted, the My Sirius Studio software will be ready to use.
Please refer to the user guide included on the software CD-ROM for instructions on using the
software.
[
My Sirius Studio Software Installation
]
1
Advertisement
Table of Contents
