Summary of Contents for Sirius Satellite Radio SIRIUS Satellite Music for Your Business Subscription
Page 1
Satellite Music for Your Business Business Equipment Package Owner's Manual and Installation Instructions Applied Media Technologies Corporation 4091 AMTC Center Drive Clearwater, Florida 33764.6976 727.531.3105 727.531.3965 sales@amtc.com www.amtc.com...
Page 2
Limited Warranty Applied Media Technologies Corporation ("AMTC") warrants this product against defective material and workmanship for a period of one year from the date of purchase. Except as specified below, this warranty covers parts and labor. The following are not covered by this warranty: 1.
Page 3
Area 6: Place the antenna at a WEST or NORTH-FACING sidewall. Remember that SIRIUS Satellite Radio is a LINE OF SIGHT technology. There must be a clear view from the antenna to the satellite, with no blockage by surrounding buildings, dense trees, etc.
Page 4
4. Plug the NON-THREADED connector on the antenna cable into the receptacle labeled ANTENNA on the upper right end of the receiver. If you must increase the distance between the antenna and the receiver, we stock 50-foot amplified extension cables (AMTC P/N EQ-SIR50X) for $39.95 (+ $5.00 S/H).
Page 5
Receiver Controls and Features Button: Turns receiver on and off. 2. Channel Switch (CHAN) & Select Button: Navigates through channels & display screens and makes selections of items highlighted on the display. Pressing up increases or moves up in the menus. Pressing down decreases or moves down in the menus.
Page 6
AMTC Technical Support at 800-741-AMTC(2682) between the hours of 9am to 5pm EST. If the receiver is installed correctly, it will automatically receive the SIRIUS Satellite Radio signal. You will see on the display “UPDATING CHANNELS” (0%, 20%, 40%, 60%, 80%, 100%).
Page 7
Search Modes (Category, Channel, Artist, Song Title) The receiver has several ways to search for and select music: by channel, by category, by artist and by song title. Searching Channels If you want to find a different channel to listen to, press and hold the DISPLAY button to enter Channel List mode: 1.
Page 8
Searching for a Channel Preset (P.TUNE Mode) It is possible to quickly search through all of your presets using the Channel Switch. 1. Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE). 2. “Preset Tuning Mode” will be displayed and the top corners of the display will invert to indicate Preset Tune Mode. 3.
Page 9
Storing Song Titles 1. While the Receiver is in the Default display mode, momentarily pressing and releasing the MEMO button stores the current program data information within the Receiver’s memory. A memory “Stored” pop-up screen, followed by “X Used/Y Empty” will each appear for 1 second (below).
Page 10
Activating the Song (S-Seek) Alert 1. Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode. 2. Press and release SELECT. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” will appear (below left). 3.
Page 11
FM Transmitter Options If you would like to use the built-in FM Transmitter, you must turn ON the function and select an FM frequency: 1. Use the Channel Switch to highlight “FM Transmitter”. Press SELECT. 2. Use the Channel Switch to select “FM On/Off”. Press SELECT. 3.
Page 12
Channel Block The receiver has the ability to lockout the use of any channels you do not want others to access without your permission. Like the Skip feature, the locked channel will not appear when the user changes channels with the Channel Switch. When the user tries to access a locked channel using the Direct Tuning function, the “Enter Code”...
Page 13
b. Auto Shutdown: You can program the unit to automatically shut off after a 1-hour period without any user intervention. After 59 minutes of inactivity, a beep tone sounds and a display prompt appears on the screen, “Cancel Auto Shutdown”. To activate the Auto Shutdown feature, use the Channel Switch to select it from the Time Based Features Menu and press SELECT to enter the menu.
Troubleshooting If there is no power to the unit: Make sure wall outlet is receiving power (plug in another device). Check power cable connection. If you get the “ANTENNA NOT DETECTED” message: Check connections to antenna. If you've connected your receiver to your amplifier but there is no sound: Make sure the amplifier input selector is set to the input to which you’ve connected the receiver.
Need help?
Do you have a question about the SIRIUS Satellite Music for Your Business Subscription and is the answer not in the manual?
Questions and answers