Priority Scan - Ericsson LBI-38862A Operator's Manual

Any of the radio's programmed channels may be assigned a priority level.
Two levels of priority our available - priority level #1 and priority level #2.
When operating in the scan mode, the scanner will stop on the first scan
channel with activity. If that channel is not a priority channel, the scanner will
continue to monitor both priority channels at each pre-programmed time
interval. When the radio detects activity on Priority Channel #2, it selects that
channel while continuing to monitor Priority Channel #1. When activity occurs
on Priority Channel #1, the scanner will immediately select that channel and
remain there until the transmission is completed and the scan wait time has
expired.
Picking up the microphone (taking it off-hook) will cause the radio to
immediately select Priority Channel #1 for operation. Unless a different
operating channel is selected, all transmissions will occur on Priority Channel
#1.
Returning the microphone to its holder (on-hook) will return the radio to
the scan mode of operation.
Refer to Priority Channel Programming for details.
1. To enter the non-priority scan mode, press the "S"
button; it will light and the radio will start scanning
all valid channels on the scan list.
2. To exit the non-priority scan mode, press the "S"
button, the radio will return to normal operation.

PRIORITY SCAN

1. To enter the priority mode, press the "S" and "P"
buttons while the microphone is on-hook. Each
will light to indicate operation in the priority mode.
The radio will now monitor the priority channels
at time intervals pre-programmed by your dealer.
13