Table of Contents
Advertisement
PRIORITY CHANNEL PROGRAMMING
1. To display the current priority channel, press the
"P" button. Note: you must be in the user program-
ming mode. Refer to Front Panel Pro-gramming.
If Channel 1 is Priority 1, "P1:01"is displayed; if
no channel has been assigned priority, then "P1:--"
is displayed.
2. Use the CHannel up
ramp to the desired channel.
3. To delete a priority channel, press the "1" auxil-
iary button.
4. To save Priority Channel 1 after selecting it, press
the "S" button to save it and bring up Priority
Channel 2 in the display.
5. If channel 2 is assigned Priority 2, then P2:02" is
displayed. If no channel has been assigned priority,
then "P2:--" is displayed.
6. Use the CHannel up
ramp to the desired channel.
7. To delete priority channel 2, press the "1" auxil-
iary button.
8. After you have completed programming your pri-
ority channels, press the "P" button, the radio will
sound the prompt tone and display "Prog".
9. To exit the programming mode, press the "2"
button. The radio will return to the normal operat-
ing state on Priority Channel 1, if assigned, or to
Ch:01 if no priority channels were programmed
into the radio.
or the CHannel down
or the CHannel down
to
to
17
Advertisement
Table of Contents
