1. Manuals
  2. Brands
  3. GSi Manuals
  4. Industrial Equipment
  5. TopDry
  6. Installation manual

GSi TopDry Installation Manual

Platforms and bin stairs, 24 ft – 36 ft
Hide thumbs Also See for TopDry:
Table of Contents

Advertisement

Quick Links

Download this manual
TopDry — Platforms and Bin
Stairs
Models:
24 FT – 36 FT
Installation Manual
PNEG-2077
Version 1.1
Date: 09-27-16
PNEG-2077

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TopDry and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GSi TopDry

Summary of Contents for GSi TopDry

  • Page 1 TopDry — Platforms and Bin Stairs Models: 24 FT – 36 FT Installation Manual PNEG-2077 Version 1.1 Date: 09-27-16 PNEG-2077...
  • Page 2 All information, illustrations, photos, and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice. PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 3: Table Of Contents

    Installing the Sidewall Attachment Brackets (Intermediate Platform to Bin Bottom) ......68 Installing the Stair Sections (Intermediate Platform to Bin Bottom)..........70 Installing the Winding Bin Stair Handrails ..................73 GSI Group, LLC Limited Warranty ...................75 PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 4 NOTES PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 5: Chapter 1 Safety Precautions

    Personnel operating or working around equipment must read this manual. This manual must be delivered with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the equipment. ST-0001–3 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 6: Cautionary Symbol Definitions

    This symbol is used to address practices not related to personal injury. This symbol indicates a general hazard. This symbol indicates a prohibited activity. This symbol indicates a mandatory action. ST-0005–2 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 7: Safety Precautions

    • Learn how to operate the machine and how to use controls properly. Do not let anyone operate without instruction. • If you do not understand any part of this manual or need assistance, contact your dealer. ST-0002–1 PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 8 • Severe roof damage can result from any blockage of air passages. • Operating fans during high humidity or cold weather condi- tions can cause air exhaust or intake ports to freeze. ST-0028–2 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 9: Safety Guidelines For Bins

    Use care when handling and moving sidewall bundles. This product has sharp edges, which may cause serious injury. To avoid injury, handle sharp edges with caution and always use proper protective clothing and CAUTION equipment. ST-0035 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 10: Safety Decals

    Warning Shear Point side and right DC-995 middle inside To replace a damaged or missing decal, contact us to receive a free replacement. GSI Decals 1004 E. Illinois St. Assumption, IL 62510 Tel: 1-217-226-4421 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 11: Safety Sign-Off Sheet

    Below is a sign-off sheet that can be used to verify that all personnel have read and understood the safety instructions. This sign-off sheet is provided for your convenience and personal record keeping. Date Employee Name Supervisor Name ST-0007 PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 12 NOTES PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 13: Chapter 2 Intermediate Platform

    Intermediate Platform Topics Covered in this Chapter ▪ Assembling the Intermediate Platform Sections ▪ Installing the Wall Attachment Brackets ▪ Installing the Intermediate Platform ▪ Installing the Handrails for Intermediate Platform PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 14: Assembling The Intermediate Platform Sections

    5/16 x 3/4 in. truss head bolt (S- Outside support angle (WBS-0015) 10267) 5/16 in. flange nut (S-3611) Platform floor pan (WBS-0011) Intermediate support angle (WBS- Arrangement of intermediate support angles 0017) (Viewed from front) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 15 Figure 2-2 Assembling the inside kick plate (first platform section) 5/16 x 3/4 in. flange bolt (S-6606) Platform floor pan (WBS-0011) 5/16 in. flange nut (S-3611) Inside kick plate (WBS-0014) Outside support angle (WBS-0015) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 16 • Hand tighten the flange bolts (2) before the platform is leveled on the bin. Figure 2-3 Assembling the sidewall attachment gussets (first platform section) 5/16 x 3/4 in. flange bolt (S-6606) Intermediate support angle (WBS-0017) 5/16 in. flange nut (S-3611) Sidewall attachment gusset (WBS-0018) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 17 5/16 x 3/4 in. truss head bolt (S- Outside support angle (WBS-0015) 10267) 5/16 in. flange nut (S-3611) Platform floor pan (WBS-0011) Intermediate support angle (WBS- Arrangement of intermediate support angles 0017) (Viewed from front) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 18 Figure 2-5 Assembling the inside kick plate (second platform section) 5/16 x 3/4 in. flange bolt (S-6606) Platform floor pan (WBS-0011) 5/16 in. flange nut (S-3611) Inside kick plate (WBS-0014) Outside support angle (WBS-0015) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 19 Figure 2-6 Assembling the stringer support bracket (second platform section) 5/16 x 3/4 in. truss head bolt (S- Platform floor pan (WBS-0011) 10267) 5/16 in. flange nut (S-3611) Stringer support bracket (WBS-0027) Intermediate support angle (WBS- 0017) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 20 • Hand tighten the flange bolts (2) before the platform is leveled on the bin. Figure 2-7 Assembling the sidewall attachment gussets (second platform section) 5/16 x 3/4 in. flange bolt (S-6606) Intermediate support angle (WBS-0017) 5/16 in. flange nut (S-3611) Sidewall attachment gusset (WBS-0018) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 21: Installing The Wall Attachment Brackets

    Wall attachment bracket (WBS-0010) Tenth hole in horizontal seam Standard bin bolt with sealing washer Third ring of sidewall Flange nut Fourth ring of sidewall Seam between third and fourth ring 18.75 in PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 22: Installing The Intermediate Platform

    Figure 2-9 Installing the sidewall attachment gussets for first platform 5/16 x 3/4 in. flange bolt (S-6606) Sidewall attachment gusset (WBS-0018) 5/16 in. flange nut (S-3611) Wall attachment bracket (WBS-0010) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 23 Figure 2-10 Installing the handrail posts for first platform 5/16 x 3/4 in. flange bolt (S-6606) Platform floor pan (WBS-0011) 5/16 in. flange nut (S-3611) Platform handrail post (WBS-0019) Outside support angle (WBS-0015) Inside kick plate (WBS-0014) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 24 Figure 2-11 Installing the outside handrail kick braces for first platform 5/16 x 3/4 in. flange bolt (S-6606) Wall attachment bracket (WBS-0010) 5/16 in. flange nut (S-3611) Outside handrail kick brace (WBS-0020) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 25 (2) and flange nuts (3). Figure 2-12 Installing the platform stiffening straps for first platform 5/16 x 3/4 in. flange bolt (S-6606) Outside handrail kick brace (WBS-0020) 5/16 in. flange nut (S-3611) Platform stiffening strap (WBS-0083) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 26 Figure 2-13 Installing the sidewall attachment gussets for second platform 5/16 x 3/4 in. flange bolt (S-6606) Sidewall attachment gusset (WBS-0018) 5/16 in. flange nut (S-3611) Wall attachment bracket (WBS-0010) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 27 5/16 x 3/4 in. flange bolt (S-6606) For 24 ft and 30 ft bins (WBS-0084) For 36 ft bins (WBS-0045) 5/16 in. flange nut (S-3611) Inside kick plate (WBS-0014) Intermediate support angle (WBS-0017) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 28 Figure 2-15 Installing the handrail posts for second platform 5/16 x 3/4 in. flange bolt (S-6606) Platform floor pan (WBS-0011) 5/16 in. flange nut (S-3611) Platform handrail post (WBS-0019) Outside support angle (WBS-0015) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 29 Figure 2-16 Installing the outside handrail kick braces for second platform 5/16 x 3/4 in. flange bolt (S-6606) Wall attachment bracket (WBS-0010) 5/16 in. flange nut (S-3611) Outside handrail kick brace (WBS-0020) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 30 Outside handrail kick brace (WBS-0020) 5/16 in. flange nut (S-3611) Platform stiffening strap (WBS-0083) 10.Tighten and level the handrail posts (9). 11.Tighten the outside handrail kick braces (15) and the platform stiffening straps (16). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 31 Figure 2-18 Installing the stringer attachment plates for second section 5/16 x 3/4 in. flange bolt (S-6606) Stringer support bracket (WBS-0027) 5/16 in. flange nut (S-3611) Stringer attachment plate (WBS-0026) Outside support angle (WBS-0015) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 32: Installing The Handrails For Intermediate Platform

    Figure 2-19 Installing the handrails 5/16 x 3/4 in. flange bolt (S-6606) Handrail bracket (WBS-0319) 5/16 in. flange nut (S-3611) Upper handrail (TDWBS-0039) 1/4 x 1 in. self-drilling screw (S-7229) Lower handrail (TDWBS-0038) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 33: Chapter 3 Assembling Winding Bin Stair Sections

    Topics Covered in this Chapter ▪ Assembling the 4–Step Winding Bin Stair Section ▪ Assembling the 5–Step Winding Bin Stair Section ▪ Assembling the Standard Sidewall Attachment Bracket ▪ Assembling the Bottom Sidewall Attachment Bracket PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 34: Assembling The 4-Step Winding Bin Stair Section

    4-step outside stringer Step (WBS-0007) Stringer identification mark Bin Diameter (ft) Inside Stringer Outside Stringer Identification (AH) Triangle cut out at bottom 24 and 30 WBS-0099 WBS-0100 Square cut out at bottom WBS-0101 WBS-0102 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 35: Assembling The 5-Step Winding Bin Stair Section

    5–step outside stringer Step (WBS-0007) Stringer identification mark Bin Diameter (ft) Inside Stringer Outside Stringer Identification (AH) Triangle cut out at bottom 24 and 30 WBS-0058 WBS-0059 Square cut out at bottom WBS-0060 WBS-0061 PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 36: Assembling The Standard Sidewall Attachment Bracket

    (2) and flange nuts (3). Figure 3-3 Assembling the Standard Sidewall Attachment Bracket 5/16 x 3/4 in. flange bolt (S-6606) Support channel (WBS-0002) 5/16 in. flange nut (S-3611) Channel kick brace (WBS-0008) Sidewall sheet bracket (WBS-0003) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 37 (49). Figure 3-4 Assembling the Standard sidewall attachment bracket 5/16 x 3/4 in. flange bolt (S-6606) Inside stringer support (WBS-0088) 5/16 in. flange nut (S-3611) Bin stair handrail post (WBS-0004) Support channel (WBS-0002) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 38: Assembling The Bottom Sidewall Attachment Bracket

    Figure 3-5 Assembling the bottom sidewall attachment bracket 5/16 x 3/4 in. flange bolt (S-6606) Support channel (WBS-0002) 5/16 in. flange nut (S-3611) Inside stringer support (WBS-0088) Sidewall sheet bracket (WBS-0003) Bin stair handrail post (WBS-0004) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 39: Chapter 4 Installing Winding Bin Stairs (Intermediate To Eave)

    Topics Covered in this Chapter ▪ Installing the Sidewall Attachment brackets (Intermediate Platform to Eave Platform) ▪ Installing the Stair Sections (Intermediate Platform to Eave Platform) ▪ Installing the Winding Bin Stair Handrails PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 40: Installing The Sidewall Attachment Brackets (Intermediate Platform To Eave Platform)

    Standard bin bolt with sealing washer Seam in second ring Flange nut Second ring Top hole in horizontal seam Sidewall attachment bracket assembly Bottom hole in horizontal seam 46.875 in. Third ring Second hole from top PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 41: Installing The Stair Sections (Intermediate Platform To Eave Platform)

    Figure 4-2 Installing the first 5–step stair section 5/16 x 3/4 in. flange bolt (S-6606) Bin stair handrail post (WBS-0004) 5/16 in. flange nut (S-3611) First 5–step stair section Inside stinger support (WBS-0088) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 42 (AF) between the stringers is consis- tent throughout the winding bin stair assembly. 4. Leave all flange bolts (2) hand tight until the eave platform is installed to the bin wall. PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 43: Installing The Winding Bin Stair Handrails

    • The swage at the top end will need to be cut off before it is attached to the handrail post in the platform. • Install the self-drilling screws (4) from the outside of the roof handrail posts (49). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 44 5/16 x 3/4 in. flange bolt (S-6606) Handrail post (WBS-0004) 5/16 in. flange nut (S-3611) Upper handrail (WBS-0048-XXX) 1/4 x 1 in. self drilling screw Lower handrail (WBS-0049-XXX) Handrail brackets (WBS-0319) XXX-Denotes the bin diameter PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 45: Chapter 5 Eave Platform

    Eave Platform Topics Covered in this Chapter ▪ Assembling the Eave Platform ▪ Installing the Eave Platform ▪ Installing the Eave Platform Handrails PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 46: Assembling The Eave Platform

    5/16 x 3/4 in. truss head bolt (S- Outside support angle (WBS-0015) 10267) 5/16 in. flange nut (S-3611) Platform floor pan (WBS-0011) Intermediate support angle (WBS- Arrangement of intermediate support angles 0017) (Viewed from front) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 47 Figure 5-2 Assembling the stringer support bracket (first platform section) 5/16 x 3/4 in. truss head bolt (S- Platform floor pan (WBS-0011) 10267) 5/16 in. flange nut (S-3611) Stringer support bracket (WBS-0027) Intermediate support angle (WBS- 0017) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 48 Intermediate support angle (WBS-0017) 5/16 in. flange nut (S-3611) Sidewall attachment gusset (WBS-0018) NOTE: Make sure the four bolt pattern in sidewall attachment gusset (10) is at the bottom and facing the bin wall. PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 49 5. Assemble a stringer attachment plate (12) to the outside of the stringer support bracket (11) using flange bolts (2) and flange nuts (3). 6. Assemble a stringer attachment plate (12) to the inside of the outside support angle (6) using flange bolts (2) and flange nuts (3). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 50 Figure 5-5 Assembling the stringer attachment plates (first platform section) 5/16 x 3/4 in. flange bolt (S-6606) Stringer support bracket (WBS-0027) 5/16 in. flange nut (S-3611) Stringer attachment plate (WBS-0026) Outside support angle (WBS-0015) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 51 5/16 x 3/4 in. truss head bolt (S- Outside support angle (WBS-0015) 10267) 5/16 in. flange nut (S-3611) Platform floor pan (WBS-0011) Intermediate support angle (WBS- Arrangement of intermediate support angles 0017) (Viewed from front) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 52 Figure 5-7 Assembling the platform end toe board and inside kick plate (second platform section) 5/16 x 3/4 in. flange bolt (S-6606) Platform floor pan (WBS-0011) 5/16 in. flange nut (S-3611) Platform end toe board (WBS-0022) Outside support angle (WBS-0015) Inside kick plate (WBS-0014) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 53 Intermediate support angle (WBS-0017) 5/16 in. flange nut (S-3611) Sidewall attachment gusset (WBS-0018) NOTE: Make sure the four bolt pattern in sidewall attachment gusset (10) is at the bottom and facing the bin wall. PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 54 Figure 5-9 Assembling the wall attachment brackets to the sidewall attachment gussets (second platform section) 5/16 x 3/4 in. flange bolt (S-6606) Sidewall attachment gusset (WBS-0018) 5/16 in. flange nut (S-3611) Wall attachment bracket (WBS-0010) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 55: Installing The Eave Platform

    5/16 in. flange nut (S-3611) Top hole in horizontal seam Stringer attachment plate (WBS-0026) Bottom hole in Horizontal seam Wall attachment bracket (WBS-0010) 5–step stair section Standard bin bolt with sealing washer Platform assembly PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 56 Figure 5-11 Installing the handrail posts for first platform section 5/16 x 3/4 in. flange bolt (S-6606) Outside support angle (WBS-0015) 5/16 in. flange nut (S-3611) Platform floor pan (WBS-0011) Intermediate support angle (WBS-0017) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 57 Figure 5-12 Installing the outside handrail kick braces for first platform section 5/16 x 3/4 in. flange bolt (S-6606) Wall attachment bracket (WBS-0010) 5/16 in. flange nut (S-3611) Outside handrail kick brace (WBS-0020) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 58 (2) and flange nuts (3) as shown. Figure 5-13 Installing the platform stiffening strips for first platform section 5/16 x 3/4 in. flange bolt (S-6606) Outside handrail kick brace (WBS-0020) 5/16 in. flange nut (S-3611) Platform stiffening strap (WBS-0083) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 59 Figure 5-14 Installing the second platform section Wall attachment bracket (WBS-0010) Bottom Hole in horizontal seam Standard bin bolt with sealing washer 18.75 in. Flange nut Platform assembly Top hole in horizontal seam PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 60 5/16 x 3/4 in. flange bolt (S-6606) For 24 ft and 30 ft bins (WBS-0084) For 36 ft ft bins (WBS-0045) 5/16 in. flange nut (S-3611) Inside kick plate (WBS-0014) Intermediate support angle (WBS-0017) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 61 Figure 5-16 Installing the handrail posts for second platform section 5/16 x 3/4 in. flange bolt (S-6606) Platform floor pan (WBS-0011) 5/16 in. flange nut (S-3611) Platform end toe board (WBS-0022) Outside support angle (WBS-0015) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 62 Figure 5-17 Installing the handrail kick braces for second platform 5/16 x 3/4 in. flange bolt (S-6606) Platform handrail post (WBS-0019) 5/16 in. flange nut (S-3611) Handrail kick brace (WBS-0025) Intermediate support angle (WBS-0017) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 63 Figure 5-18 Installing the outside handrail kick braces for second platform 5/16 x 3/4 in. flange bolt (S-6606) Wall attachment bracket (WBS-0010) 5/16 in. flange nut (S-3611) Outside handrail kick brace (WBS-0020) Platform handrail post (WBS-0019) PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 64 Outside handrail kick brace (WBS-0020) 5/16 in. flange nut (S-3611) Platform stiffening strap (WBS-0083) 12.Tighten and level the handrail posts (9). 13.Tighten the outside handrail kick braces (15) and the platform stiffening straps (16). PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 65: Installing The Eave Platform Handrails

    (22) into the single platform lower handrail (19) in the first platform section before securing with the self-drilling screws (4). NOTE: Install the self-drilling screw (4) from the outside of the handrail post (9). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 66 5/16 in. flange nut (S-3611) Single platform lower handrail (WBS-0024) 1/4 x 1 in. self-drilling screw (S-7229) Double platform upper handrail (WBS-0039) Platform handrail post (WBS-0019) Double platform lower handrail (WBS-0038) Handrail bracket (WBS-0319) PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 67: Chapter 6 Installing Winding Bin Stairs (Intermediate To Bin Bottom)

    Topics Covered in this Chapter ▪ Installing the Sidewall Attachment Brackets (Intermediate Platform to Bin Bottom) ▪ Installing the Stair Sections (Intermediate Platform to Bin Bottom) ▪ Installing the Winding Bin Stair Handrails PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 68: Installing The Sidewall Attachment Brackets (Intermediate Platform To Bin Bottom)

    Seam in second ring Flange nut 37.5 in. Top hole in horizontal seam Sidewall attachment bracket assembly Bottom hole in horizontal seam 46.875 in. Platform assembly Fifth ring Third ring Second hole from top Fourth ring PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 69 NOTE: If the bin has a rolled lip instead of the base angle, then the sidewall attachment bracket will need to be field cut to allow the bracket to mount against the bin wall. PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 70: Installing The Stair Sections (Intermediate Platform To Bin Bottom)

    4. Align the bottom end of the 5-step stair section (AD) to the handrail post (49) and the inside stringer support (48) and secure using flange bolts (2) and flange nuts (3). NOTE: Hand-tighten the flange bolts (2). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 71 6. Align the bottom end of the 5-step stair section (AE) to the handrail post (49) and the inside stringer support (48) and secure using flange bolts (2) and flange nuts (3). NOTE: Hand-tighten the flange bolts (2). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 72 5/16 in. flange nut (S-3611) Previous 5–step stair section Inside stinger support (WBS-0088) Last 5–step stair section 7. Tighten all the flange bolts (2) after all stair sections are installed to the bin wall. PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 73: Installing The Winding Bin Stair Handrails

    (4) with swaged end up. NOTE: • The swaged end should be pushed into the handrail as far as it can go. • Install the self-drilling screws (4) from the outside of the roof handrail posts (49). PNEG-2077 TopDry – Platforms and Bin Stairs...
  • Page 74 5/16 x 3/4 in. flange bolt (S-6606) Handrail post (WBS-0004) 5/16 in. flange nut (S-3611) Upper handrail (WBS-0048-XXX) 1/4 x 1 in. self drilling screw Lower handrail (WBS-0049-XXX) Handrail brackets (WBS-0319) XXX-Denotes the bin diameter PNEG-2077 TopDry – Platforms and Bin Stairs...

  • Page 75: Gsi Group, Llc Limited Warranty

    12 months after sale to the original end-user or if a foreign sale, 14 months from arrival at port of discharge, whichever is earlier. The end-user’s sole remedy (and GSI’s only obligation) is to repair or replace, at GSI’s option and expense, products that in GSI’s judgment, contain a material defect in materials or...
  • Page 76 Authorities having jurisdiction should be consulted before installations are made. 1004 E. Illinois St. Assumption, IL 62510-0020 Phone: 1-217-226-4421 Fax: 1-217-226-4420 www.gsiag.com GSI is a worldwide brand of AGCO Corporation. Copyright © 2016 by GSI Group Printed in the USA CN #326466...

Table of Contents