Maintenance Schedule - Ryobi RIG2000PCB Original Instructions Manual

MAINTENANCE SCHEDULE

Check engine lubricant
Change engine lubricant
Check air filter
Clean air filter
Change air filter
Check/adjust spark plug
Replace spark plug
Check/adjust idle speed
Check/adjust valve
clearance
1
Clean fuel tank and filter
1
Check fuel hose
Fuel filter
Check all hose connections
Inspect fuel tank vapor vent
(if equipped)
Inspect carbon canister
(CARB models only)
1. These items should only be carried out by an authorised service centre.
NOTE: Maintenance should be performed more frequently when generator is used in dusty areas.
When the generator has exceeded the maximum figures specified in the table, maintenance should still be cycled
according to the intervals of time or hours stated herein.
MAINTENANCE
After 1st month
Before
or 20 hours of
each use
operation
n
n
n
n
Inspect
n
n
n
Every 3 months Every 6 months
or 50 hours of or 100 hours
operation of operation
n
n
n
n
Every year or
after 300 hours
of operation
n
n
n
n
n
Replace
n
n
n