Safety Precautions - Hayward ColorLogic 4.0 Installation Manual

Hazardous voltage can shock, burn, cause serious injury and or death. To reduce the risk of
electrocution and or electric shock hazards:
• Ground Fault Circuit protection must be used in the circuit, however, all electrical wiring
MUST be in conformance with all applicable local codes, regulations, and the National
Electric Code (NEC).
• Replace damaged wiring immediately
• Reference NEC codes for all wiring standards including, but not limited to, grounding,
bonding and other general wiring procedures.
• Networked ColorLogic Lights and related electrical connections are receiving electrical power
at all times, even when the lights are OFF! Turn off power at the main breaker before
servicing ColorLogic lights.

Safety Precautions

Warning
!
Page 1