Hayward ColorLogic 4.0 Installation Manual page 17

Light Show Programming
Press + or – buttons to toggle between
Step X
all available motion options. Press the
right arrow to move to the next step.
Note: When motion is set to OFF, there is no delay and all lights will illuminate at
the same time. When motion is set to a positive value (+0.2 to +1.2), the order of
illumination will start from the lowest LT number and advance to the highest. If a
negative motion value is selected (-1.2 to -0.2), the illumination sequence will be the
opposite (highest LT to lowest).
Press + or – buttons to toggle between
Step Y
all available brightness options. Press
the right arrow to move to the next step.
Page 15