Table of Contents
Advertisement
www.mgeups.com
3.4.2
System
Click the "System" section in the menu.
This menu enables the selection of your preferences to display information on the home page.
UPS contact: This text field is limited to 32 characters. Enter the name of the person responsible
for UPS administration at IT network level and/or electrical maintenance. This field does not
appear on any other Web page. By default, its value is "Computer Room Manager".
UPS location: Enter a description (limited to 32 characters) of the location of the UPS in your
installation (e.g. Computer room E1-C066). This text is displayed on the home page at the top
right, above the name of the UPS. Its value by default is "Computer room".
Log interval: Value between 20 and 99999 seconds. Enables initialisation of the save period of
Measurements, Events, System in the Log menu. Its value by default is 60 sec.
Refresh rate: Value between 5 and 99999 seconds. Enables initialisation of the refresh rate of the
home page. Its value by default is 10 sec.
Default language: Enables initialisation of the browser language for card connection.
>
Auto: Automatically displays the Web page texts in the same language as your browser. If the
SNMP/web card is not able to display the recognised language, the pages will be displayed in
English.
>
English: Displays the Web page texts in English, regardless of the language of your browser.
>
French: Displays the Web page texts in French, regardless of the language of your browser.
Validate your configuration by clicking "Save". The save is immediate.
The browser must be rebooted for alarm notification to take account of a language change.
"Reset communication" button: performs a remote reboot of the card without modifying its
configuration. This action is compulsory to take into account network parameters changes made
on the "IP network" page. This operation is made secure by Login and Password entry.
"Factory reset" button: returns to the default configuration for all the card parameters.
CAUTION: the IP address and all other parameters having been reinitialised, you may lose
communication with the card after clicking this button.This operation is made secure by Login and
Password entry.
T H E
U N I N T E R R U P T I B L E
Network Management Cards – User Manual
P O W E R
P R O V I D E R
34003676EN/AA
Page 20/42
Advertisement
Table of Contents
