Reset Button; Console Port; Modem Port; Management Port - Extreme Networks Summit4 Hardware Installation Manual

Note: For information on Summit7i switch LEDs, refer to "Summit1i, Summit5i,
Summit7i, and Summit48i Switch LEDs," on page 1-27.

Reset Button

The reset button is used to hard reset the switch. Use a non-conductive tool to push the
reset button.

Console Port

The console port (9-pin, "D" type connector) is used for connecting a terminal and
carrying out local management.

Modem Port

The modem port is used to connect a modem for remote access to the command line
interface (CLI).

Management Port

The management port (RJ-45 connector) is a 10/100 Mbps Ethernet connection used for
out-of-band management.

PCMCIA Slot

The PCMCIA slot is reserved for future use.
Summit Switch Hardware Installation Guide
Summit7i Switch Front View
1-23