Cleaning Tips - Bissell PROHEAT 2X REVOLUTION 1548 Series User Manual

Cleaning Your Carpet
1 2
Select Cleaning Mode
Max Clean
» Provides a heavy cleaning for
your dirtiest carpets.
» Dry Time: About 8 hours.
Deep Clean
» Delivers a deep clean to your
carpet.
Express Clean
» Provides a lighter clean.
Plug into » Dry Time: About 30 minutes.
a properly
*recommended cleaning pace is
grounded outlet.
12 inches per seconds
4
Max Clean & Deep Clean Modes:
Standard Cleaning
1. Press the Spray Trigger to apply solution
while making 2 slow, wet passes
(1 forward, 1 back).
2. Release the Spray Trigger.
3. Make 2 slow, dry passes (1 forward, 1
back) to suck up the dirty solution. Do
not hold down the trigger for this step.

CLEANING TIPS:

» To prevent damage to Berber carpets, avoid repeated strokes in the same area.
» For best cleaning performance, clean with your machine in Deep Clean Mode.
» Max Clean Mode is intended for your dirtiest carpeted areas. Dry time is an estimated
8 hours. To expedite the drying process, place a fan in the room or near the carpet.
» In Express Clean Mode, the Dirty Water Tank will not get as full as when cleaning with
Deep or Max Clean Mode.
» It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple
times during the cleaning process. Room size and the speed at which you clean both
affect how often the tank may need to be refilled and/or emptied.
10
www.BISSELL.ca
3
Press the power button
to turn the machine ON.
To recline your machine
for use, press the recline
pedal with your foot.
Express Clean Mode:
1. Press the Spray Trigger to apply
solution while making 2 wet passes
(1 forward, 1 back).
2. Release the Spray Trigger.
3. Make 2 dry passes (1 forward, 1
back) to suck up the dirty solution.
Do not hold down the trigger for
this step.