Bissell PROHEAT 2X REVOLUTION 1548 Series User Manual page 12

Cleaning with the Bare Floor Tool*
*The Bare Floor Tool that is compatible with the ProHeat 2X® Revolution™ is not
included. It is available for purchase by contacting our team by phone or visting us
online at BISSELL.ca.
1
With the machine unplugged,
attach the Bare Floor Tool to
the bottom of the machine by
lining the tool to the edge of
the nozzle. Rotate down until it
clicks into place.
Follow filling instructions on
pages 9 and switch Cleaning
Mode to Express Clean.
WARNING
To reduce the risk of fi re and electric shock when cleaning a hard fl oor, the BISSELL Bare Floor Tool
(1606611) must be used and is only to be used with BISSELL® Hard Floor Formulas intended for use with
this appliance.
12
www.BISSELL.ca
2 3
When finished,
unplug the machine
and remove the
Bare Floor Tool by
rotating the tool up
Plug into a properly
to unhook from the
grounded outlet and
nozzle.
press the power button.
Rinse and let dry
Clean by pressing the
before storing.
trigger for 1 wet pass
Refer to page 13
forward, 1 wet pass
for emptying the
back. Then release
Dirty Water Tank.
the trigger and make
Refer to page 14 for
1 dry pass forward,
"Cleaning Machine
1 dry pass back.
After Use".