Toshiba RAV-GM 801UT-E Service Manual page 109

No. Part name
Fan guard 1. Detachment
1) Following to work of Detachment of
NOTE
Do the work on cardboard or a cloth etc. spread out to
prevent the product from being scratched.
2) Remove the outlet cabinet and place the fan guard
side facing down.
3) Remove the claws (8 places) of the fan guard.
2. Attachment
1) Hook the hooks from the front side and press the claws
(8 places) by hand to fix them in place.
NOTE
Ensure that all the claws are fixed in their specified
position.
[Reference] 1) TD sensor: discharge pipe
Sensor
2) TL sensor: heat exchanger upside
mount
3) TS sensor: 4-way valve - between accumulator
positions
4) TE sensor: lowest capillary joint
5) TO sensor: Heat exchange surface
1) TD sensor
3) TS sensor 3) TS sensor 3) TS sensor
Procedure
2) TL sensor
4) TE sensor 4) TE sensor 4) TE sensor
– 109 –
Remarks
Discharge cabinet
Hooking claw Hooking claw Hooking claw
Fan guard Fan guard Fan guard
2) TL sensor
5) TO sensor 5) TO sensor 5) TO sensor
3) TS sensor 3) TS sensor 3) TS sensor
1) TD sensor 1) TD sensor 1) TD sensor
4) TE sensor 4) TE sensor 4) TE sensor