Identifying Supplied Parts; Recommand Cable Type And Permissible Length - IDTECK iCON100 Quick Installation Manual

1. IDENTIFYING SUPPLIED PARTS

Unpack and check the contents. If any of these parts are missing, contact your distributor.
Main Unit (1ea)
Keypad(Option)

2. RECOMMAND CABLE TYPE AND PERMISSIBLE LENGTH

Reference
①
② *
③
④
⑤
⑥
* Requires thicker wire if you connect the reader with high current consumption.
Quick Guide (1copy)
LCD Module(Option)
Description
iCON100 Power (DC12V)
DC Power -> iCON100
Reader (Power and Data)
Extra Reader
Door Contact
Exit Button
Sensor Input
Input -> iCON100
Door Lock,
Alarm Device
Lock (Alarm) -> iCON100
RS232 Cable
Converter -> Host P.C.
RS422 Cable
iCON100 -> iCON100
iCON100 -> Converter
Door Lock & ALARM Guide (1Sheet)
Cable Specification
Belden #9409, 18 AWG
2 conductor, unshielded
Belden #9512, 22 AWG
4 conductor, shielded
Belden #9514, 22 AWG
8 conductor, shielded
Belden #9512, 22 AWG
4 conductor, shielded
Belden #9514, 22 AWG
8 conductor, shielded
Belden #9409, 18AWG
2 conductor, unshielded
Belden #9829, 24 AWG
2-twisted pair, shielded
Belden #9830, 24 AWG
3-twisted pair, shielded
2
Quick Installation Guide
Diode (2ea) Resistor2.2k(4ea)
TCP/IP Module(Option)
Maximum
Distance
3m
150m
300m
300m
15m
1,200m