Operation; Before Initial Use - Dometic COOLFREEZE CF35 Operating Manual

Operation

6 Operation
6.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 18).
Mounting the handles
The handles are enclosed unassembled. If you wish to attach the handles, proceed
as follows:
➤ Make a handle by putting two holders (fig. 5 1, page 4) and a handle (fig. 5 2,
page 4) together.
➤ Fasten the grip with the enclosed screws in the holes provided.
Turning the lid stop around (CF50)
You can turn the lid stop around if you want to open the lid from the other side. To
do this, proceed as follows:
➤ Open the lid and pull it out (fig. 6 A, page 5).
➤ Turn the lid.
➤ Insert the lid in the lid holders on the side opposite the cooler (fig. 6 B, page 5).
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 3) twice.
➤ Use the "UP +" (fig. 3 6, page 3) and "DOWN –" (fig. 3 7, page 3) buttons to
select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
12
CF35, CF40, CF50
EN