Disposal - Dometic COOLFREEZE CF35 Operating Manual

Cooling boxes, compressor cooler
Hide thumbs Also See for COOLFREEZE CF35:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Disposal

Fault
When operating from
the DC outlet:
The ignition is on
and the device is not
working and the LED
is not lit.
The display shows an
error message (e.g.
"Err1") and the appli-
ance does not cool.
10
Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
20
Possible cause
The DC outlet is dirty.
This results in a poor
electrical contact.
The fuse of the DC plug
has blown.
The DC fuse inside the
device has blown.
The vehicle fuse has
blown.
The appliance has
switched off due to an
internal fault.
CF35, CF40, CF50
Suggested remedy
If the plug of your cooler becomes very
warm in the DC outlet, either the DC
outlet must be cleaned or the plug has
not been assembled correctly.
Replace the fuse in the DC plug, see
chapter "Replacing the plug fuse
(12/24 V)" on page 17.
This can only be repaired by an
authorised repair centre.
Replace the vehicle's DC outlet fuse.
Please refer to your vehicle's operating
manual.
This can only be repaired by an
authorised repair centre.
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Coolfreeze cf40Coolfreeze cf50

Table of Contents