Refrigerator Storage - True TR-30 Installation & User Manual

SHELVING
All shelving and door bins come packaged inside the unit.
REFRIG ER ATOR S TOR AG E
G L A S S SHELV E S
Remove the top foam piece holding the glass shelves. Carefully remove shelves and set aside. Remove all other
packing material. To install, insert glass shelf into the shelf standards on the back wall, with the front tilted
upward, and then lower the front until it stops. To remove or adjust a glass shelf, tilt up, and then lift up and out.
FINAL GLASS SHELF INSTALLATION
D O O R BIN S
The door bins are located in the bottom drawer of the refrigerator. To install, push tabs into the slots in the door
and slide downward unit it stops. To remove or adjust a door bin, lift up and away from door back.
NO T E: BE C AU T IOU S O F P L A CING TA L L I T EM S IN T OP D O O R BIN, A S I T EM S MIGH T IN T ER F ER E
W I T H UI C ON T R O L PA NEL .
FINAL DOOR BIN INSTALLATION
D R AW ER S
To remove a drawer, pull drawer forward until it stops. Use a Phillips screw driver to remove the two (2) screws
securing the drawer to the slides, then lift the drawer up and out of unit. To reinstall, pull drawer slides all the
way forward on unit, and then slide the drawer onto the slides until the hook on the back of the slide is over top
of the drawer, reinstall the screws using the Phillips screw driver.
30 INCH COLUMNS
31