Fuel Injection - Perkins 1106C Genset Systems Operation Testing And Adjusting

18
Systems Operation Section

Fuel Injection

Introduction (Fuel Injection)
Illustration 19
Diagram of the basic fuel system (typical example)
(1) Electronic unit injector
(2) Solenoid for the fuel injection pump
(3) Wastegate solenoid (if equipped)
(4) Position sensor (fuel injection pump)
(5) Fuel injection pump
i02709987
(6) Crankshaft position sensor
(7) Boost pressure sensor
(8) Fuel pressure sensor
(9) Engine oil pressure sensor
(10) Inlet air temperature sensor
KENR6931
(11) Coolant temperature sensor
(12) Diagnostic connector
(13) Electronic control module (ECM)
g01202269