Installation – parameter setting
1
FUNCTION
If the installer setting is to enable the valve exercising the dial thermostat will
Valve Exercising
additionally send 5 minute pulse on actuator once a week, 24 hours- 7 days.
PWM
PWM output to drive actuator open/close
PROBE
Need help
Actuator can be normally closed/normally open.
Actuator
Subject to installer jumper selection
Setback
Need help
Floor sensor temp
(optional)
If you are fitting an external
sensor for air/floor sensing
please select temp here. It can
be set from 0-45 and as preset
at 27. Please note the dip
switches (2) need to be set for
Air or Floor.
DESCRIPTION
2
Parameter setting
VS05 Installer Manual
DEFAULT
ON
ON
ON
ON
ON
13