Pop Mode; Dark Mode; Scan Display - Uniden R1 User Manual

Sensitivity Level %
80
70
60
50
40
30
Turn X band on in the menus with K and Ka bands still on (default); the band
sensitivities are:
• Highway: X, K, and Ka band full sensitivity.
• City: X and K band sensitivity reduced; Ka band full sensitivity.
If a band is turned off through the menus, it is off in all modes.
Press CITY on the front of the unit to alternate between Highway, City, and
Advanced mode.

POP MODE

In POP mode, the R1 can detect short burst from radars that are too fast for many
other detectors to catch. You can turn POP mode on and off for the K and Ka bands.

DARK MODE

Turn on Dark Mode through the menus to keep the screen dark except when a
button is pressed or an alarm goes off. The screen is dark except for a small blinking
dot that moves from left to right on the display. You can set the screen brightness
through the menus for when alarms go off or buttons are pressed.

SCAN DISPLAY

The OLED uses a curved line to indicate scanning is in progress. A heart icon
indicates the end of one scan cycle and the beginning of another. Select SCAN
display through the Display Mode menu.
Sensitivity Adjustment (Attenuation)
- -
16
– 2dB
– 3dB
– 4.5dB
– 6dB
– 8dB
– 10.5dB