Pop Mode; Scan Display; Alarm Priorities; Mute Memory - Uniden DFR7 User Manual

Long range radar/laser detector
Hide thumbs Also See for DFR7:
Table of Contents

Advertisement

POP MODE

In POP mode, the DFR7 can detect short burst from radars that are too fast for many other detectors to catch.
You can turn POP mode on and off in the Menu system.

SCAN DISPLAY

A small dot on the screen indicates that the unit is scanning for signals. This dot travels back and forth in the
middle of the screen. You can turn this display on and off in the Menu system.

ALARM PRIORITIES

x Speed Camera / Red Light Camera / User Mark Alarm/POI Limit Speed Alarm
x Laser signal
x X, K, Ka Band signal
x User Limit Speed Alarm
x Vehicle Low Battery Voltage Warning, Vehicle Battery Saver Alarm

MUTE MEMORY

Use Mute Memory to mute known areas of false alarms (such as department store automatic doors). The DFR7
remembers where you muted the audio (GPS location) and the frequency you muted. It will automatically
mute when you travel to that location and the saved frequency is detected; however, if a different frequency is
detected, the DFR7 alerts to that different frequency.
When you press MUTE/DIM or the MUTE button on the charger to mute audio for a specific location, Mute On
displays. While Mute On displays, press MUTE/DIM or the MUTE button on the charger again to save that GPS
location to memory. Mute Memory displays on the screen.
To delete Mute Memory points, press MUTE/DIM or the MUTE button on the charger while Mute Memory
displays. The DFR7 displays a delete confirmation message; press MUTE/DIM or the MUTE button on the
charger again to confirm. You can also delete Mute Memory points from Menus/Delete All Mute?

MAINTENANCE

MAINTAINING THE EQUIPMENT

The DFR7 requires very little physical maintenance. Wipe it with a soft cloth to keep dust from accumulating.
Check the power cord connections to keep them clean and free of corrosion.

UPDATING THE FIRMWARE/DATABASE

Uniden recommends that you update your DFR7's firmware and database periodically. Go to www.
unidensupport.com, find your model, and check if you have the latest

TROUBLESHOOTING

IF...
The unit won't turn on
Scan Display
.
- - -
mph
Elements on the screen vary according to what you turn on
and o in the Menu system
DFR7 stores up to 100 Mute Memory points.
TRY THIS...
Check the connections. Be sure they are all secure.
- 12 -
C-NoX
CITY
firmware.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents