City/Highway Mode - Uniden GPS9000NZ Owner's Manual

GPS Qk newfont 2/13/02 4:05 PM Page 21
Example: K Band
Note: • The alert tones for the radar, laser, and SWS are
all different.
• The Audio warning tone won't be functional if you
are driving less than 20Km/H.

City/Highway Mode

You can change the detector's sensitivity to activate its warning
feature according to
your driving area.
CITY
Press and the
current setting level
will appear on the
display. To change the
CITY
level, press
again within 2 sec.
The level is set at 0 (Highway) initially and you may choose to
increase the city mode from level 1 to 4 based on how sensitive
you wish to set the detector.
Level 0 : This is the most sensitive setting. The detector
(Highway) will be more sensitive to distant signals, but it also
is more likely to false alarm.
Level 1-4 : The detector filters out weaker signals to reduce
(City) false alarms, however you will not receive Audio
Warnings until you get closer to the source.
Note: Setting the city level to 4 greatly reduces the range for
receiving an audio alert.
GREEN
Signal LV 1
GREEN
Signal LV 2
GREEN
Signal LV 3
GREEN
Signal LV 4
GREEN
Signal LV 5
GREEN
Signal LV 6-7
GREEN
GREEN
GREEN
19
CITY
CITY
CITY