Table of Contents
Advertisement
W
M
A L L
O U N T E D
Configuring for a Television that will be used without the Preamp/Receiver.
TV Source Select Key
When the Source Select
key labeled TV is
pressed, the preamp/
receiver DOES NOT
turn on automatically
(Auto Power Insert fea-
ture disabled).
A press to any of the
other Source Select
keys (Auto Power Insert
feature enabled) DOES
issue the preamp/
receiver power com-
mand.
This change in operation
has been achieved by
selectively disabling the
IntelliPad's built-in Auto
Power Insert feature.
Disabling or Enabling the Auto Power Insert For One of the Source Select Keys
If the local television will be used by itself, it is usu-
ally desirable to disable the IntelliPad's automatic
insertion of the preamp/receiver "power" com-
mand (Auto Power Insert feature) for the TV's
Source Select key only. To disable or enable this
feature for a particular source do the following:
1. Press and hold the PROGRAM button for more
than 2 seconds. Sources that have the feature
P
R O G R A M M A B L E
TUNER
CD
TAPE
VCR
LASER
TV
Figure 20
Configuring for a local television
"enabled" will light. Sources that have the
feature "disabled" will not light.
2. Press the SOURCE SELECT KEY you wish to mod-
ify. The source select key will toggle back and
forth between enabled and disabled.
3. To exit the Program mode, press the PROGRAM
button. The PROGRAM LED will go out.
I R K
S
E Y P A D
Y S T E M
TV Control Keys
The TV, like any
source, is controlled
via the source control
keys.
Volume Keys
Since the TV is used
by itself in this sys-
tem, the Volume
Keys issue only the
TV volume up and
down when the TV is
selected.
When any of the
other sources are
selected, volume
reverts to the pre-
amp/receiver's vol-
ume up and down.
24
Hide quick links:
Advertisement
Table of Contents
