Table of Contents
Advertisement
Simple Network Management Protocol (SNMP)
Simple Network Management Protocol (SNMP)
This unit supports the following groups of SNMP V1
MIB2:
1)
• System Gp.
• Interface Gp.
• IP Gp.
• ICMP Gp.
2)
• TCP Gp.
• UDP Gp.
3)
• SNMP Gp.
For information about the SNMP commands supported
by this unit, Private Management Information Base
(MIB), and SNMP traps, see the pages indicated
below.
• SNMP commands
Organization of commands (page 90)
Details of commands (page 90)
• Private MIB
Organization of system information (page 93)
Details of system information (page 93)
Organization of commands (page 94)
Details of commands (page 96)
Organization of status information (page 100)
Details of status information (page 102)
Organization of msb traps (page 107)
Details of msb traps (page 108)
• SNMP Traps (page 110)
Notes
• For some MIBs, there is no support.
1) The sysORTable and sysORLastChange are not
supported.
2) The tcpConnTable is not supported.
3) snmpSilentDrops and snmpProxyDrops are not
supported.
• When the SNMP Trap setting is "Enable", consider
around 118 kbps as the upper limit on UDP packet
traffic to the Network Node Manager.
• Use SNMP in a network environment protected by a
firewall or other security measures.
• Carry out the loading of Private MIB definition files
to the Network Node Manager in the sequence sony-
smi.mib, sony-common.mib, and sony-msb2000.mib.
Similarly, unload in the order: sony-msb2000.mib,
sony-common.mib, sony-smi.mib.
89
Advertisement
Table of Contents
