Sony MSB-2000 Operation Manual page 14

Multi-format stream bridge
Table of Contents

Advertisement

Changing Settings Using the Front Panel
If the new setting of ts_rate is outside the
permitted range
An error message appears in the display window.
C061:ts_rate
error max=68Mbps
Press the MENU button or ENTER button, and
reenter the setting value.
For details of the setting range, see the List of Menus
(page 36).
To cancel a changed ts_rate
Without pressing the ENTER button, press the
MENU button.
To return all "C:Setup" settings to their values
before a change
1 With the v and V keys, display "C998:cancel."
2 Press the ENTER button.
The "Execute" indication and ENTER button
flash.
3 Press the ENTER button.
The ENTER button goes off, and all setting
changes within "C:Setup" are canceled.
7
After pressing the b key, with the v key display
"A:process."
8
Press the ENTER button.
The "analyse" indication and ENTER button flash.
9
Press the ENTER button.
The "analyse OK start" indication and ENTER
button flash.
If a change in ts_rate causes errors in related
items
In the lower part of the display window the item
number causing the error appears.
A:process
C013,C021,C022,C023
If an item number will not fit in the display
window, the B and b keys flash. Press a flashing
key to check the related item number.
After checking, return to step 1, and reenter the
setting value.
10
Press the ENTER button.
This executes the setting.
11
Press the MENU button.
The MENU button goes off, and this exits the
menus.
To change the IP address
1
Press the MENU button.
The MENU button lights, and the menu appears in
the display window.
2
Press the V key, to display "L:network."
3
Press the B key.
4
With the v and V keys, display "L001:ip_addr."
In the lower part of the display window , the
currently set IP address appears.
5
Press the ENTER button.
The cursor on the IP address and the ENTER
button flash.
6
Enter the setting value with the v and V keys.
To move from one digit to another use the B and
b keys.
7
Press the ENTER button.
The ENTER button goes off, and the IP address is
changed.
To cancel a change of IP address
Without pressing the ENTER button, press the
MENU button.
14

Advertisement

Table of Contents
loading

Table of Contents