Sony MSB-2000 Operation Manual page 84

List of Menus
Item number Category
T056 status
T057 status
Item Arguments
rtp_tx_packet –
rtcp_tx_rr –
Function
In sdi_to_asi/sdti-cp_to_asi/tx-rx/tx-rx (cm)
mode, outputs the number of RTP packets
output to the network in the most recent
one-second interval.
In asi_to_sdi/asi_to_sdti-cp mode, outputs
"--------" to indicate that this is invalid.
The maximum output value is "65535."
That is to say, if 65535 or more RTP
packets are output in a second, the output
is "65535."
Note that when the MSBA-20IP board is
not installed, "RTP option is not mounted"
is output.
In sdi_to_asi/sdti-cp_to_asi/tx-rx/tx-rx (cm)
mode, reports whether RTCP RR packets
are received for the RTP/RTCP packets
currently being transmitted, as follows:
If RR is being received: "alive"
If RR is not being received: "not alive"
In asi_to_sdi/asi_to_sdti-cp mode, outputs
"--------" to indicate that this is invalid.
Note that when the MSBA-20IP board is
not installed, "RTP option is not mounted"
is output.
84