Table of Contents
Advertisement
DESCRIPTION
D
escription of the converter.
D
escription of the autodiagnostic LEDs.
Green LED
Fixed: Correct operation.
Slow blinking: Programming activated.
Quick blinking: Programming finished.
Red LED
Fixed: Programming error, go through
the steps from the beginning.
Off: Correct operation
INSTALLATION
D
etail of the converter installation.
The converter can be installed on a DIN guide (6 elements)
by lightly pressing it. To extract the converter from the DIN
guide, use a plain screwdriver to lever the flange as shown
on the picture.
3,5 x 45
DIN-7971
DIN rail latch release
Autodiagnostic LEDs
Connection block
3,5 x 45
DIN-7971
To install the converter directly on the wall, drill two holes
of Ø6mm. and insert the wallplugs. Fix the transformer with
the specified screws.
Install the converter in a dry and protected place.
The autodiagnostic LEDs are placed
next to the configuration dip switch.
DIN 46277
4
Advertisement
Table of Contents
