Page 1
Digital Conver r Module CD-NEXA/BT Code 50121959 CD-NEXA/BT REV.0 1...
Page 2
Green LED indicating connection status. Nexa bus connector. Description of the SW1 DIP switch: For the CD-NEXA/BT module to operate properly, keep DIP switches 1 and 2 in the OFF position. Description of the Nexa Bus link connector: The Nexa Bus link connector is located at the bottom of the CD-NEXA/BT module.
Page 3
MEMEDIT 5 program from the documentation page https://doc.golmar.es. This program can be used to programme the door panel and back up installations to enable the restoring of devices whose memories, due to error or fault, have been damaged.
Page 4
C/ Silici, 13 08940- Cornellá de Llobregat SPAIN Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis. Golmar reserves the right to make any modifications without prior notice.