Electrical Box
4. Electrical Box
Warning
Step
1
Remove the screw, and
then the service cover.
2
Remove the screw, and
then the wire fixture.
3
Remove the 4 screws
on the terminal board
and disconnect the
connecting wire.
4
Remove the screw and
release the earth/
ground wire.
5
Pull out the indoor heat
exchanger thermistor.
6
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Terminal board
Earth/ground wire
Service
cover
(R20146)
Wire fixture
Connecting
wire
(R20147)
Be careful not to lose the clip
of the thermistor.
Clip
Indoor heat
exchanger
thermistor
(R23481)
Si041403EB
Points
(R11268)
Removal Procedure