Daikin ATKM50QRV16 Service Manual page 12

PCBs
Step
2 Unfasten the 2 hooks
and remove the shield
plate.
3 Disconnect the
connector [S2] for the
terminal board.
4 Pull out the harness for
the indoor heat
exchanger thermistor
from the hole.
5 Unfasten the 4 hooks
and remove the control
PCB.
10
Procedure
Hook
Left view
Shield plate
[S2]
Hook
Control PCB
Hook
(R23576)
Some models have
[H1][H2][H3] instead of [S2].
In case of [H1][H2][H3],
disconnect the terminals
Harness for
from the terminal board.
the indoor
heat exchanger
Terminal board
thermistor
1: black, back
2: white, back
3: red, back
(R20161)
(R20162)
Si041403EB
Points
Removal Procedure