Table of Contents
Advertisement
RRU3269
Installation Guide
Step 2 Strip the specified length of the sheath off the power cable, as shown in
Figure 10-3 Stripping the specified length of sheath
Step 3 Strip a specified length of sheath off each core wire. The length must be consistent with the
length of the notch in the tool-less female connector (pressfit type), as shown in
Figure 10-4 Stripping the sheath off each core wire
Figure 10-5 Matched length
Step 4 Add a tool-less female connector (pressfit type) to two core wires.
1.
Issue Draft A (2014-10-31)
Tighten the screws using a Phillips screwdriver, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Appendix
Figure
10-3.
Figure
10-4.
Figure
10-6.
67
Advertisement
Table of Contents
