To Program Using The Phone Keys - Benefon DRAGON TDP70WN Service Manual

3.1.2 To program Using the Phone Keys

1. Connect the QPS50 localbox via maintenance adapter to your phone, and
turn the phone on.
2. Press
3.1.2.1 Sales Date
1. Choose
SALES DATE [XXXXXX].
2. Choose
[daydaymonthmonthyearyear]. Remember to check that the date is correct.
If the date is correct, choose
choosing
daydaymonthmonthyearyear). To save the date, choose
It is possible to program the sales date ONLY ONCE, which means that you
will not be able to change it again afterwards. If the sales date has not been
programmed, your phone will not enter the normal stand-by mode.
3.1.2.2 Radio Path Identification
1. Press
RADIO PATH ID [XXXXXXXXXX].
2. Choose
save the identification by choosing
radio path identification is correct.
3.1.2.3 Own number
1. Press
2. Choose
operator), and save it by choosing
number is correct.
Note! SMS doesn't work if the own number has not been programmed.
3.1.2.4 Phone Code
1. Press
PHONE CODE [XXXX].
2. Choose
by choosing
3.1.2.5 Y1 Y3 ID (Additional operator indicator)
It is possible to change old/add new operator indicator which operates in
automatic roaming mode. (network selection mode: Automatic)
6DP_70GB.fm
,
will be flashing in the display in stand-by mode.
and the following text will appear in the display: ***BENEFON***.
SELECT. The following text will appear in the display:
CHANGE. [XXXXXX] will be replaced by the date

and enter the correct date (six digits in the following form:
, and the following text will appear in the display:
CHANGE. Enter the radio path identification (ten digits), and
: own number [+ XXXX...X]
CHANGE. Enter the own number (follow the instruction of the
, and the following text will appear in the display:
CHANGE. Enter the phone code (four digits), and save the code
SAVE.
Product: TDP70WN /
5.9.2000
SAVE. If the date is incorrect, delete it by
SAVE. Remember to check that the
SAVE. Remember to check that the own
Installation Instructions
SAVE.
2