CARE AND CLEANING
When the Clean indicator
begins to flash on the display,
run a clean cycle: Press the Clean
will stop flashing. Then press the
Brew button to begin
the Clean cycle.
When the Clean cycle is complete
(approximately 15 minutes), 3 beeps
will sound, and the Clean indicator
will turn off.
Reinstall or replace the water filter.
Replace the filter every 3 months
under normal use. Replace it more
often under heavy use.
IMPORTANT: The Clean cycle can be completed at regular intervals, if desired,
without the Clean indicator needing to light up. Follow these directions to
clean the Coffee Maker whenever desired.
22 | CARE AND CLEANING
). The Clean indicator
Run at least two water-only cycles
after the Clean cycle is complete.
Reinstall the coffee filter.