OPERATING THE COFFEE MAKER
FILLING THE COFFEE MAKER WITH WATER FOR BREWING
TIP: Brew two pots of fresh, cool water and discard before brewing the first
pot of coffee.
Lift the water tank lid and fill
with enough fresh, cool water to
make the desired amount of coffee.
Use the cup indicators on the water
tank window to view water input.
Close the water tank lid.
NOTE: When using the Small Batch brew cycle, make sure to fill the tank with
only the amount of water needed to brew your desired number of cups. If you
put in 12 cups of water, the Coffee Maker will brew all 12 cups.
PAUSE AND POUR FEATURE
The Pause and pour feature enables you to remove the carafe from the Coffee Maker and
pour a cup of coffee before brewing is finished. When the carafe is removed,
a special valve stops the flow of coffee from the filter basket. However, brewing
does not stop. If the carafe is not placed back in the Coffee Maker within 25 seconds,
water and coffee grounds will overflow the filter basket.
Place the carafe in the Coffee Maker.
Make sure the bottom of the carafe
is fully seated; otherwise, the Pause
and pour feature may not engage,
causing water and coffee to overflow
the filter basket.
OPERATING THE COFFEE MAKER | 15