Raymarine ST60+ Compass Instrument Owner's Handbook Manual page 29

Chapter 3: Installation
3. Referring to the
seal (8) in the corresponding recess on the back of the flush mount bezel (7).
4. Place the instrument (11) face upwards on a flat surface, then place the rub-
ber keypad (10) in position around the display window (i.e. so that each but-
ton outline is located over its associated button on the instrument).
Fitting the flush mount bezel
Fitting the flush mount bezel
7
illustration, insert the panel
8 9 10
17
11 12