28
Leaving User calibration
Press the disp and lock buttons for 2 seconds, to save your changes, exit User
calibration and return to normal operation.
4.3 Intermediate calibration
The Intermediate calibration procedures (see the
chart) enable you see:
• Software version.
• Master/Repeater status.
To access the intermediate calibration information, hold down the disp and lock
buttons together for approximately 4 seconds.
Intermediate Calibration
Software version number
This screen shows the software version number. This information is normally
required when requesting parts or repairs.
ST60+ Compass Instrument Owner's Handbook
Hold down
and
disp
Software
CAL
version
TRUE
disp
Instrument
CAL
status
TRUE
Press
and
disp
Intermediate calibration
for approximately 4 seconds
lock
MAG
r 0 = master
r 1 = repeater
MAG
For 2 seconds
lock
to exit Intermediate calibration
flow