Page 2
Quick start guide for Race Master Notice: For full user documentation for the Micronet family and for other useful infomation please refer to the CD-ROM supplied with your product, or to the Raymarine website at www.raymarine.com. www.raymarine.com...
Display Features Display Features Switching on and off To switch your Race Master on or off, press for two seconds Standalone Operation (see page 4 for networked mode) Top Pane Heading is permanently displayed in the top pane. Bottom Pane There are three Functions ;...
Quick start guide for Race Master Backlighting To adjust the display backlighting press and hold ,. then use to select from OFF, or levels 1,2,3. Keylock Keylock can be enabled in setup to protect from accidental key presses. When keylock is enabled, pressing a key causes the unit to give the unlock key prompt.
“-” digital or bar graph indications. Permanent wind shifts These can be recognised as a constant header on one tack, and a constant lift on the other tack. In this situation, you can adjust the Mean Wind Direction (MWD) as follows: www.raymarine.com...
Page 6
Quick start guide for Race Master Sail close hauled on either tack. If on starboard tack, press . If on port tack tack, press . The new Mean Wind Direction (MWD) is captured. The Mean Wind Direction (MWD) pop-up is displayed.
Once locked the reference speed remains fixed until the Race Master is switched off. Bar Graph Functionality The bar graph can be set to show one of the data items described below.
The scale can be set between +/- 25 and +/- 100 percent in setup. Additional Micronet Functions If other Raymarine Transmitters or external NMEA devices are connected to the network, additional modes and data pages are available. See the Race Master System guide for details...
Need help?
Do you have a question about the Race Master and is the answer not in the manual?
Questions and answers