Playback - Pioneer XDJ-R1 Quick Start Manual

Playback

Press the [f (PLAY/PAUSE)] button.
 Pausing
During playback, press the [f (PLAY/PAUSE)] button.
! Playback resumes when [f (PLAY/PAUSE)] button is pressed
again.
! When tracks have been loaded from a disc, the disc automatically
stops spinning if no operation is performed for 100 minutes while in
the pause mode.
Forward and reverse scanning
Turn the jog dial while pressing the [SHIFT] button.
The track is fast-forwarded/fast-reversed in the direction in which the jog
dial is spun.
! When the [SHIFT] button is released, this function is canceled.
! When you stop the jog dial from spinning, normal playback resumes.
! The fast-forward/fast-reverse speed can be adjusted according to the
speed at which the jog dial is spun.
Finding the beginnings of tracks (Track
Search)
Press one of the [TRACK SEARCH o, p] buttons.
Press the [p] to move to the beginning of the next track.
When [o] is pressed, playback returns to the beginning of the cur-
rently playing track. When pressed twice in a row, playback returns to
the beginning of the previous track.
! It is not possible to move to a different category or folder with the
track search function.
Frame search
In the pause mode, spin the jog dial.
The pause position can be moved in units of single frames.
! The position is moved in the direction of playback when the jog dial
is spun clockwise, in the reverse direction when it is spun counter-
clockwise. The position moves 135 for one revolution of the jog dial.
Super fast track search
Turn the jog dial while pressing one of the
[TRACK SEARCH o, p] buttons.
The track is advanced at high speed in the direction in which the jog dial
was turned.
Adjusting the playing speed (Tempo
control)
Move the [TEMPO] slider forward or backward.
The playing speed increases when the slider is moved to the [+] side
(towards you), decreases when the slider is moved to the [–] side (away
from you).
The rate at which the playing speed is changed is indicated on the main
unit display.
 Selecting the playing speed adjustment range
Press the [TEMPO RANGE] button.
The playing speed adjustment range switches each time the button is
pressed.
[WIDE, ±16, ±10, ±6] is displayed on the main unit display.
! Adjustment is possible in units of 0.02 % when [±6] % is selected,
0.04 % when [±10] % or [±16] % is selected, and 0.5 % when [WIDE]
is selected.
! The [WIDE] adjustment range is ±100 %. When set to –100 %, play-
back stops.
! [WIDE] can only be selected when playing music CDs (CD-DA).
 Adjusting the playing speed without changing
the pitch (Master Tempo)
Press the [MASTER TEMPO] button.
The [MASTER TEMPO] indicator lights. The pitch does not change even
when the playing speed is changed with the [TEMPO] slider.
! The sound is digitally processed, so the sound quality changes.
Setting Cue
1 During playback, press the [f (PLAY/PAUSE)]
button.
Playback is paused.
2 Press the [CUE] button.
The point at which the track is paused is set as the cue point.
The [f (PLAY/PAUSE)] indicator flashes and the [CUE] indicator
lights. No sound is output at this time.
! When a new cue point is set, the previously set cue point is canceled.
 Adjusting the cue point position
1 Turn the jog dial while pausing at a cue point.
The [f (PLAY/PAUSE)] and [CUE] indicators flash.
The cue point can be fine-adjusted in units of single frames.
2 Press the [CUE] button.
The position at which the button was pressed is set as the new cue point.
! When a new cue point is set, the previously set cue point is canceled.
 Returning to Cue Point (Back Cue)
During playback, press the [CUE] button.
The set immediately returns to the currently set cue point and pauses.
! When the [f (PLAY/PAUSE)] button is pressed, playback starts
from the cue point.
 Checking Cue Point (Cue Point Sampler)
Keep pressing the [CUE] button after returning to the
cue point.
Playback starts from the set cue point. Playback continues while the
button is held in.
Setting the loop automatically based on
the track's tempo (Auto Beat Loop)
1 During playback, turn the [AUTO BEAT LOOP] control
to set the length for loop playback in number of beats.
The main unit display switches to the beat display.
2 Press the [AUTO BEAT LOOP] control to start loop
playback.
The loop out point is set automatically according to the track's tempo
(BPM) and loop playback starts.
19
En