Operation; Playback; Playing The Rekordbox Library On A Computer Or Mobile Device; Outputting Sound - Pioneer XDJ-RX Operating Instructions Manual

Operation

For more information, please refer to the operational instruction of this
product published on the Pioneer DJ support site.

Playback

This section describes basic track selection operations and how to
switch the screen.
Playing media connected to or inserted in
this unit
1 Open the cover of the USB device insertion slot and
connect the USB device.
2 Press the media button (any of [USB1], [USB2]).
The tracks or folders are displayed on a list.
The medium whose contents are displayed on the main unit display can
be switched.
[USB1] button: Displays the contents on the USB device connected to
USB1.
[USB2] button: Displays the contents on the USB device connected to
USB2.
If the storage device (USB) contains rekordbox library information,
the rekordbox library is displayed.
3 Turn the rotary selector.
Move the cursor and select the item.
Press the rotary selector to move to a lower level in the folder. Press
the [BACK] button to return to the level above.
When the [BACK] button is pressed for over 1 second or the medium
button for the medium being browsed is pressed, the display moves
to the topmost level.
4 Use the rotary selector to select and enter the track
you want to load.
When the rotary selector is pressed while the cursor is set at a track,
track menu is displayed.
When the [LOAD ,
track, that track is loaded in the specified deck of the unit.
The track is loaded and playback starts.
When the track is loaded, the screen switches to the normal play-
back screen.
When a track has been loaded while pausing, press the [
(PLAY/PAUSE)] button to start playback.
When auto cue is turned on, the disc pauses at the audio start posi-
tion. In this case, press the [
If the medium contains the rekordbox library
If the USB device connected to this unit contains the rekordbox library
information, the rekordbox library is displayed.
Music files are displayed in the categories (album, artist, etc.) set
with rekordbox.
14
En
] button is pressed while the cursor is set to a
(PLAY/PAUSE)] to start playback.
Playing the rekordbox library on a
computer or mobile device
Music files are displayed in the categories (album, artist, etc.) set with
rekordbox.
1 Press the [rekordbox] button.
The rekordbox library is displayed on this unit's main unit display.
To select a mobile device connected by USB, press the [USB] button.
2 Turn the rotary selector.
Move the cursor and select the item.
3 Use the rotary selector to select and enter the track
you want to load.
When the rotary selector is pressed while the cursor is set at a track,
track menu is displayed.
When the [LOAD , ] button is pressed while the cursor is set to a
track, that track is loaded in the specified deck of the unit.

Outputting sound

Before the sound output, check that the unit and the surrounding
devices are properly connected.
Connecting the input/output terminals (p. 11 )
Set the volume of the power amplifier or powered speakers connected to
the [MASTER1] and [MASTER2] terminals to an appropriate level. Note
that loud sound may be output if the volume is set too high.
To output the sound of channel 1 [CH1]
To output the sound of [CH 2] (channel 2), replace [CH1] with [CH 2],
[DECK 1] with [DECK 2] and [PHONO1/LINE1] with [PHONO2/LINE2] in
the procedure below.
1 Switch the [DECK 1, PHONO1/LINE1] selector switch in
the [CH1] section.
Select the input source for [CH1] from among the devices connected to
this unit.
— [DECK 1]: Selects rekordbox, MIDI, USB1, USB2.
— [PHONO1/LINE1]: Selects the device connected to the
[PHONO1/LINE1] terminals.
2 Turn the [TRIM] control in the [CH1] section clockwise.
Adjusts the audio level input to the [CH1] terminal.
The [CH1] channel level indicator lights when audio signals are being
properly input to [CH1].
Adjust the [TRIM] control so that the orange indicator lights where the
track's volume is highest (at the climax, etc.)
Be careful that the red indicator does not light, or the sound could be
distorted.
3 Move the [CH1] channel fader to the back side.
The level of the sound output from the [CH1] terminals is adjusted.
4 Switch [CROSS FADER CURVE THRU,
crossfader curve selector switch).
This switches the crossfader curve characteristics.
5 Set the crossfader.
Switch the channel whose sound is output from the speakers.
— Left edge: The [CH1] sound is output.
— Center position: The sound of [CH1] and [CH 2] is mixed and
output.
— Right edge: The [CH 2] sound is output.
This operation is not necessary when the [CROSS FADER CURVE
(THRU, , )] (crossfader curve selector switch) is set to [THRU].
, ] (the