Alcatel-Lucent 9763 Operation And Installation
  1. Manuals
  2. Brands
  3. Alcatel-Lucent Manuals
  4. Wireless Access Point
  5. 9763
  6. Operation and installation
Alcatel-Lucent 9763 Operation And Installation

Alcatel-Lucent 9763 Operation And Installation

Metro cell indoor b25 lte 2x250mw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
APPLICANT: Alcatel-Lucent
EXHIBIT 3
FCC ID: AS5BBTRX-14
EXHIBIT 3
Section 2.1033 (c)(3) INSTALLATION AND OPERATING INSTRUCTIONS
A copy of the installation and operating instructions to be furnished to the user. A draft copy of the
instructions may be submitted if the actual document is not available. The actual document shall be
furnished to the FCC when it becomes available.
Response
A copy of
Alcatel-Lucent
9763 MCI B25 PCS LTE 2x250mW, AC
Hardware Installation
manual is
attached to this exhibit.
Page 1 of 1

Advertisement

Table of Contents
loading

Related Manuals for Alcatel-Lucent 9763

Summary of Contents for Alcatel-Lucent 9763

  • Page 1 The actual document shall be furnished to the FCC when it becomes available. Response A copy of Alcatel-Lucent 9763 MCI B25 PCS LTE 2x250mW, AC Hardware Installation manual is attached to this exhibit. Page 1 of 1...
  • Page 2 Use pursuant to applicable agreements Title page Alcatel-Lucent 9763 Metro Cell Indoor B25 LTE 2x250mW Operation and Installation 3MN-MCI-IMOP Issue 1 | December 2013 Alcatel-Lucent – Proprietary Use pursuant to applicable agreements...
  • Page 3 The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2013 Alcatel-Lucent. All rights reserved. Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside Alcatel-Lucent without its written authorization.

  • Page 4: Table Of Contents

    Safety - specific hazards ................................. Product safety ..................................... Hardware architecture and functionality Overview ...................................... Functional description ................................Physical description ................................. Supported installation options ..........................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...
  • Page 5 ..........................9763 MCI installation clearances ............................9763 MCI daisy chain requirements ..........................9763 MCI installation Overview ...................................... Procedure 3-1: Mount the 9763 MCI onto a wall 3-10 3-10 ....................... LED State Description Overview ..................................... LED status for 9763 MCI ..............................
  • Page 6 List of tables Recommended wall anchor materials ....................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...
  • Page 7 List of tables ............................................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 8 List of figures 9763 MCI hardware- front and back views ..................... 9763 MCI connection interfaces .......................... LED position and orientation ..........................Wall mount Installation example ......................... 9763 MCI daisy chain installation example ..................... 9763 MCI mounting bracket ..........................9763 Metro Cell Indoor installation clearances ....................
  • Page 9 List of figures ............................................................................................viii Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 10 List of procedures 9763 MCI installation Mount the 9763 MCI onto a wall 3-10 3-10 ......................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...
  • Page 11 List of procedures ............................................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...

  • Page 12: About This Document

    Reason for reissue December 2013 Standard Supported systems This document applies to the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW. How to use this document Chapter 1 provides safety information. Chapter 2 provides an overview of the 9763 MCI physical architecture and operations.

  • Page 13: Prerequisites

    Vocabulary conventions In this document the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW is also referred to as the 9763 MCI V1.0 B25 LTE 2x250mW, or simply the 9763 MCI. Typographical conventions The typographical conventions used in this document are described in the following table.
  • Page 14 500 kcmil 600 kcmil NOTE: The dash, when it appears, counts as a size when considering connecting capacity (see 7.1.7.2 in the standard)..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary xiii 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...

  • Page 15: Document Support

    ..............................................Document support For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at the following telephone numbers. These numbers apply for document support only. Please see the section “Technical support” for details about product hardware, software, and technical support.

  • Page 16: Safety Statements

    However, hazards may arise if procedures are not followed correctly or safe working practices are not complied with. Contents Structure of safety statements Safety Safety - specific hazards Product safety ..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...

  • Page 17: Structure Of Safety Statements

    Consequences if protective measures fail Avoidance message Protective measures to take to avoid the hazard Identifier The reference ID of the safety statement (optional) ..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 18 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE Indicates a hazardous situation not related to personal injury..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...

  • Page 19: Safety

    • for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device must be incorporated external to the equipment..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...

  • Page 20: Safety - Specific Hazards

    8 cm. No other persons shall stay in front of the product at a distance of less than 22 cm..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 3MN-MCI-IMOP...
  • Page 21 Failure to observe this fact and the safety warnings may lead to bodily injury and property damage..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 22 Falls can occur when working at heights resulting in serious personal injury or death. To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe work practices and wear appropriate fall protection equipment..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 3MN-MCI-IMOP Use pursuant to applicable agreements...
  • Page 23 Make sure after finishing your work that no tools, testing equipment, flashlights, etc., have been left in or on the equipment..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...

  • Page 24: Product Safety

    The instructions, cautions and warnings found on these labels must be understood and observed by all personnel involved with the equipment installation and maintenance..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 3MN-MCI-IMOP Use pursuant to applicable agreements...
  • Page 25 Safety statements Product safety ............................................................................................1-10 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...

  • Page 26: Hardware Architecture And Functionality

    H ardware architecture and functionality Overview Purpose This chapter provides an overview of the hardware architecture and product functionality of the Alcatel-Lucent 9763 Metro Cell Indoor. Contents Functional description Physical description Supported installation options Hardware and ancillary items 2-10 ..............................................

  • Page 27: Functional Description

    Rx sensitivity at -98 dBm. • Supports Gigabit Ethernet backhaul and daisy chaining to one additional 9763 MCI. Attention: The 9763 MCI product has feature parity with some but not all macro eNodeB features. See the Alcatel-Lucent LTE RAN eNodeB Macro and Metro Products - LR13.3.L - FDD Release Notes, 9YZ-05817-0001-FMZZA.

  • Page 28: Physical Description

    Hardware architecture and functionality Physical description ..............................................Physical description Product overview The Alcatel-Lucent 9763 Metro Cell Indoor is designed for indoor installations and is housed in an Alcatel-Lucent passively-cooled enclosure containing the following active components/modules: Module Functions Power AC/DC power conversion...
  • Page 29 SFP connectors (two) - one for backhaul and one for daisychaining AC power supply connector Power supply The 9763 MCI requires an uninterruptible AC power feed (single phase, three-wire voltage source). • Input voltage range: 85Vac - 270Vac • Nominal voltages: 110Vac and 230Vac •...
  • Page 30 The 9763 MCI supports a single bi-color LED (red/green) which is located on the rear lower portion of the 9763 MCI. The LED is not intended for use during normal operation of the equipment, however, it can provide a visual status of the equipment during initial installation and commissioning.

  • Page 31: Led Position And Orientation

    Hardware architecture and functionality Physical description ..............................................Figure 2-3 LED position and orientation Product labelling The 9763 MCI module has the following labelling: 1. A product label reflecting: • Vendor name/Icon • Model name • Part number • Serial number •...
  • Page 32 • Alcatel-Lucent 9763 Metro Cell Indoor Ancillary orderable items In addition to the 9763 MCI base items, the following ancillary and variable items can be ordered depending on the product configuration and deployment scenario: • Mounting frame for wall installation •...

  • Page 33: Supported Installation Options

    Standard installation options The 9763 MCI can be installed in any indoor place such as business environments or indoor public places (shopping malls, airports. etc.) and is designed to address mobile service providers' (MSPs) need to place coverage and capacity where it's needed fast (such as indoor high-use hotspots).
  • Page 34 Hardware architecture and functionality Supported installation options ..............................................Figure 2-5 9763 MCI daisy chain installation example 9763 MCI 2x250mW 9763 MCI 2x250mW Electrical SFP Optical SFP Electrical SFP BH1 BH2 BH1 BH2 Optical SFP Backhaul system Electrical or Optical daisy chain cable...
  • Page 35 Hardware and ancillary items ..............................................Hardware and ancillary items Overview The following section lists the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW base hardware equipment, the installation kits and ancillary items that can be ordered from Alcatel-Lucent. 9763 MCI base items The 9763 MCI packaging contains the following base items: •...
  • Page 36 250m Multimode Dual Fiber LC-LC Optional 1000Base-SX GigE optical transceiver Fiber Optic cable 300m Multimode Dual Fiber LC-LC Optional 1000Base-SX GigE optical transceiver ..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 2-11 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...
  • Page 37 Hardware architecture and functionality Hardware and ancillary items ............................................................................................2-12 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 38 9 763 MCI installation Overview Purpose This chapter provides information and procedures for mounting the Alcatel-Lucent 9763 Metro Cell Indoor onto a wall. Contents 9763 MCI pre-installation 9763 MCI Pre-installation information 9763 MCI installation clearances 9763 MCI daisy chain requirements...
  • Page 39 Purpose This section provides pre-installation information (including required tools and materials and installation clearances) as well as outlining the possible daisy chain deployment scenarios and requirements for the Alcatel-Lucent 9763 Metro Cell Indoor product. Contents 9763 MCI Pre-installation information 9763 MCI installation clearances 9763 MCI daisy chain requirements ..............................................
  • Page 40 Packing List, immediately notify the carrier that delivered the unit and contact your Alcatel-Lucent representative. The product packaging contains the following items: • The Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW. Installation materials In addition to the standard product deliverable ensure the appropriate mounting brackets, installation kits and ancillary items are available to support the product mounting options.
  • Page 41 9763 MCI installation 9763 MCI Pre-installation information 9763 MCI pre-installation ..............................................Table 3-1 Recommended wall anchor materials Surface structure Recommended anchor materials Recommended screw torque Wood Screw Hex T M8x70 stainless steel (x4) 7.0 N.m (62.0 lb.in). Washer plain M8x16x1.6 stainless steel (x4)
  • Page 42 ..............................................9763 MCI installation clearances Minimum installation clearances The following provides the minimum wall mount clearances recommended around the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW. Figure 3-2 9763 Metro Cell Indoor installation clearances Back view Front view...

  • Page 43: Electrical Backhaul And Daisy Chain Configuration

    9763 MCI daisy chain requirements Overview Two 9763 MCI can be daisy chained together to share the same backhaul port, reducing the investment cost needed to connect individual 9763 MCI to the backhaul network and aggregating the uplink traffic. The daisy chain link between two 9763 MCI can be the same as the backhaul link (either electrical or optical) or a mixed link configuration is possible as shown in the following deployment scenario's.

  • Page 44: Optical Backhaul And Daisy Chain Configuration

    Mixed link for backhaul and daisy chain The following shows the deployment scenario's for mixed optical/electrical backhaul and daisy chaining. For daisy chaining to another 9763 MCI and additional cable and SFP are required. Figure 3-5 Mixed optical backhaul with electrical daisy chain configuration...

  • Page 45: Mixed Electrical Backhaul With Optical Daisy Chain Configuration

    9763 MCI installation 9763 MCI daisy chain requirements 9763 MCI pre-installation ..............................................Figure 3-6 Mixed electrical backhaul with optical daisy chain configuration 9763 MCI 2x250mW 9763 MCI 2x250mW 10/100/1000Base-T 1000Base-SX SFPs (850nm wavelength) BH1 BH2 BH1 BH2 Backhaul system Optical (multimode dual fiber)
  • Page 46 Overview 9763 MCI installation ..............................................9763 MCI installation Overview Purpose This section provides the installation instructions for mounting the Alcatel-Lucent 9763 Metro Cell Indoor onto a wall. Contents Procedure 3-1: Mount the 9763 MCI onto a wall 3-10 ..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent –...
  • Page 47 Wall mount installation The 9763 MCI weighs 4.8 kg (10.6 lbs) and can be easily mounted onto solid concrete or wooden flat surface using the following installation kits, anchor materials and tools. • For installation and recommended anchor materials, see “Installation materials”...
  • Page 48 To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe work practices and wear appropriate fall protection equipment. Perform the following procedure to mount the 9763 MCI directly onto a wall........................................Mount the 9763 MCI wall bracket (mounting frame) to the wall.
  • Page 49 Install SFP module(s) into the SFP ports on the rear of the 9763 MCI........................................Attach the Ethernet cable(s) to the SFP module(s) at the rear of the 9763 MCI........................................Check attachment of RF antenna cables: If you are using...
  • Page 50 ........................................Swing the 9763 MCI toward the wall bracket (mounting frame) to hide access to the rear of the unit, and lock the 9763 MCI in position using the key supplied with the 9763 MCI........................................Ensure all cables are externally routed and secured.
  • Page 51 9763 MCI installation Procedure 3-1: Mount the 9763 MCI onto a wall ............................................................................................3-14 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...

  • Page 52: Alcatel-Lucent - Proprietary

    Appendix A: LED State Description Overview Purpose This chapter describes the LED status and descriptions for 9763 MCI. Contents LED status for 9763 MCI ..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...

  • Page 53: Led State Description

    ..............................................LED status for 9763 MCI Overview This topic describes the LED status of the 9763 MCI device. Figure A-1 LED position and orientation Hardware LED interpretation table The following table describes the possible states for the single bi-color LED:...
  • Page 54 LED State Description LED status for 9763 MCI ..............................................State Description Cell is operational Cell has been in stable operation for 15 minutes ..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...
  • Page 55 LED State Description LED status for 9763 MCI ............................................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 56 Overview Purpose This section presents the product conformance statements that apply to the Alcatel-Lucent 9763 Metro Cell Indoor access point equipment. The statements that are required are determined primarily by national or multi-national regulations. However, in some regions, contract terms determine which statements are required.
  • Page 57 United States compliance Introduction Purpose The statements that follow are the product conformance statements that apply to the Alcatel-Lucent 9763 Metro Cell Indoor when deployed in the United States. Contents Federal Communications Commission Product safety conformance statements Antenna exposure statements...

  • Page 58: Product Conformance Statements

    Federal Communications Commission Federal Communications Commission Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc. could void the user’s authority to operate the equipment. This device complies with Part 15 of the 47 CFR FCC Rules. Operation is subject to the...

  • Page 59: Product Safety Conformance Statements

    Applicant for the product or by contacting Alcatel-Lucent Technical Support. See the Alcatel-Lucent Support web site ( (http://www.alcatel-lucent.com/support/)) for contact information.

  • Page 60: Antenna Exposure Statements

    Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all installations must be evaluated for requirements contained in Table 1, “Limits for maximum permissible exposure”, in section 1.1310..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary 3MN-MCI-IMOP Use pursuant to applicable agreements...

  • Page 61: Fda/Iec Optical Transmitter Product Compliance Statements

    FDA/IEC optical transmitter product compliance statements FDA/IEC optical transmitter product compliance Alcatel-Lucent declares that this equipment complies with the Food and Drug Administration’s Center for Devices and Radiological Health (FDA/CDRH) regulations 21 CFR 1040.10 and 1040.11. It is a Class I/1 laser optical fiber communication systems “product”...

  • Page 62: Eco-Environmental Statements

    For more information regarding collection and recovery of packaging and packaging waste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health and Safety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888) 539-2783. Material content compliance The following notification applies to Alcatel-Lucent products distributed for sale, resale, or use.
  • Page 63 Product conformance statements Eco-environmental statements ............................................................................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 64 Network element located at the MSC which provides the radio control logic for managing calls. The AP is a general purpose computer that can host a number of RCS virtual machines..............................................Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI GL-1 3MN-MCI-IMOP Use pursuant to applicable agreements...
  • Page 65 Cell site An installation located within a cell that houses the equipment needed to set up and complete calls on a cellular telephone..............................................GL-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 66 10 times the common logarithm of the ratio of two powers. DC (Direct Current) Current flow in one direction..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary GL-3 3MN-MCI-IMOP Use pursuant to applicable agreements...
  • Page 67 To operate a power load on a main-driven rectifier in parallel with a low impedance storage battery, which is kept fully charged by the rectifier and is itself only called upon to provide power ..............................................GL-4 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 68 The conductive objects that are intentionally bonded to furnish connection to earth (i.e., buried ring ground with ground rods, electrically continuous buried metallic water pipe, electrolytic ground electrode, etc.)..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary GL-5 3MN-MCI-IMOP Use pursuant to applicable agreements...
  • Page 69 A copper bus bar used to provide the electrical interfaces for connection of the isolated ground plane to the integrated ground system. MHz (Megahertz) Reference of radio frequency spectrum of one-million cycles. MOP (Method of Procedure) ..............................................GL-6 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 70 Specified value or intended value independent to any uncertainty in its realization. In a device that realizes a physical quantity, it is the value of such a quantity specified by the manufacturer. Non-Alcatel-Lucent power 3rd party power systems, or power systems other than Alcatel-Lucent..............................................Pair cable Cable made up of one or more separately insulated wire pairs, none of which is arranged with another quads.
  • Page 71 RoHS Restriction of Hazardous Substances Rx (Receive) ..............................................Sector The coverage area within the degree of directionality of the antennas..............................................GL-8 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 72 THHN (Thermoplastic high-heat resistant nylon-coated) Three-phase An alternating current supply with three sinusoidal voltages differing in phase by 120°. THWN (Thermoplastic heat and water resistant nylon-coated) ..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary GL-9 3MN-MCI-IMOP Use pursuant to applicable agreements...
  • Page 73 ..............................................W (watts) The derived SI unit of power. It is equivalent to 1 joule per second, or 1 volt-ampere..............................................GL-10 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 74 The characteristic shape of a periodic wave, determined by the frequencies present and their amplitudes and relative phases. WEEE Waste Electrical and Electronic Equipment ..............................................Alcatel-Lucent 9763 MCI Alcatel-Lucent – Proprietary GL-11 3MN-MCI-IMOP Use pursuant to applicable agreements Issue 1 December 2013...
  • Page 75 Glossary ............................................................................................GL-12 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...
  • Page 76 3-11 Wire cross-sectional area table, ............. xiii tools, Hardware and ancillary items Wire size table, xiii ............. 9763 MCI Module base items, phone numbers 2-10 for document support, Ethernet cable (electrical), 2-11 Physical description, Ethernet cable (optical), 2-11 Power supply,...
  • Page 77 Index ............................................................................................IN-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9763 MCI Use pursuant to applicable agreements 3MN-MCI-IMOP Issue 1 December 2013...

Table of Contents