Functional Description - Alcatel-Lucent 9763 Operation And Installation

Metro cell indoor b25 lte 2x250mw
Table of Contents

Advertisement

Hardware architecture and functionality
....................................................................................................................................................................................................................................

Functional description

General description
Alcatel-Lucent Metro Cells product family enables mobile service providers (MSPs) to
deliver cost-effective capacity to high-density areas. They also enhance the quality of
experience (QoE) for end users by enabling faster, more reliable data connections and
higher data throughput on 4G networks. The product can be deployed by mobile operators
to provide a transparent outdoor capacity layer to complement the macro cell "umbrella"
coverage layer.
The Alcatel-Lucent 9763 Metro Cell Indoor product specified here is targeted for indoor,
high user density locations where additional capacity is required within a small footprint,
such as businesses and shopping malls.
Product features and capabilities
The product features and capabilities in this release are as follows:
• Supports LTE FDD.
• Single LTE carrier.
• PCS (1900 MHz - B25) frequency band.
• Supports up to 64 users simultaneously.
• High transmit power: 250mW at each antenna connector, and an Equivalent
Isotropically Radiated Power (EIRP) of 28 dBm per path.
• Capable of supporting 30 Mbps downlink (1930 to 1995 MHz) and a 9 Mbps uplink
(1850 to 1915 MHz) in the 5 MHz bandwidth.
• Supports two internal, quasi-omnidirectional, spatially-separated antennas (4 dBi
gain).
Supports cabling to optional external antennas (used instead of the integrated
antennas).
• Standard 2x2 MIMO configurations, 2 transmit and 2 receive diversity.
• Receiver sensitivity for LTE channel bandwidths 5 MHz optimized to permit near far
simultaneous operation, with Rx sensitivity at -98 dBm.
• Supports Gigabit Ethernet backhaul and daisy chaining to one additional 9763 MCI.
Attention: The 9763 MCI product has feature parity with some but not all macro
eNodeB features. See the Alcatel-Lucent LTE RAN eNodeB Macro and Metro
Products - LR13.3.L - FDD Release Notes, 9YZ-05817-0001-FMZZA.
....................................................................................................................................................................................................................................
2-2
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Functional description
Alcatel-Lucent 9763 MCI
3MN-MCI-IMOP
Issue 1 December 2013

Advertisement

Table of Contents
loading

Table of Contents