Table of Contents
Advertisement
9763 MCI installation
9763 MCI pre-installation
....................................................................................................................................................................................................................................
9763 MCI daisy chain requirements
Overview
Two 9763 MCI can be daisy chained together to share the same backhaul port, reducing
the investment cost needed to connect individual 9763 MCI to the backhaul network and
aggregating the uplink traffic. The daisy chain link between two 9763 MCI can be the
same as the backhaul link (either electrical or optical) or a mixed link configuration is
possible as shown in the following deployment scenario's.
Note: Physically the backhaul SFP port BH1 is on top of daisy chain SFP port BH2.
BH2 SFP port
(back)
Electrical link for backhaul and daisy chain
The following shows the deployment scenario for electrical backhaul and daisy chaining.
For daisy chaining to another 9763 MCI and additional cable and SFP are required.
Figure 3-3 Electrical backhaul and daisy chain configuration
10/100/1000Base-T
Backhaul
....................................................................................................................................................................................................................................
3-6
9763 MCI 2x250mW
SFP
system
Electrical cable to
Backhaul system
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
BH1SFP port
(front)
10/100/1000Base-T
BH1 BH2
daisy chain cable
9763 MCI daisy chain requirements
9763 MCI 2x250mW
SFP
BH1 BH2
Electrical
Alcatel-Lucent 9763 MCI
Issue 1 December 2013
3MN-MCI-IMOP
Advertisement
Table of Contents
