Related Manuals for Alcatel-Lucent 9962
Summary of Contents for Alcatel-Lucent 9962
- Page 1 Title page Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Hardware Installation 3MN-02001-0002-RJZZA Issue 2.01 | September 2015...
- Page 2 Legal notice Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
-
Page 3: Table Of Contents
How to comment ................................... Safety and general information Overview ...................................... Structure of safety statements ............................... General hazard statements ..............................Basic safety aspects .................................. Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 installation Overview ...................................... Pre-installation information ..............................Mounting guidelines ................................Cabling 2-19 2-19 ....................................... - Page 4 Contents ..............................................Commissioning process ................................Post-installation activities Overview ...................................... Post-installation information ..............................Product conformance statements Overview ..................................... United States ....................................Environmental requirements ..............................Glossary Index ..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 5 List of tables Wi-Fi Status LED initialization states ....................................................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 6 List of tables ............................................................................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 7 9962 MSEC v1.0 mounting plate ........................9962 MSEC v1.0 stick antennas .......................... Notch, groove and lock locations 2-11 2-11 ........................Mounting plate on the 9962 MSEC v1.0 access point 2-12 2-12 ................9962 MSEC v1.0 integrated antennas 2-13 2-13 ......................
- Page 8 List of figures ............................................................................................viii Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
-
Page 9: About This Document
Intended audience The audience for this document is installation personnel. Supported systems This document applies to the Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 access point. How to use this document Start with the first chapter and work through the manual to the end. Once you have done this, you will have carried out the hardware installation completely and in the proper sequence. -
Page 10: Conventions Used
About this document ..............................................Conventions used Naming Conventions The full product name, Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1, is referred to as one of the following throughout this manual: • Alcatel-Lucent 9962 MSEC • 9962 MSEC v1.0 • MSEC Typographical conventions... -
Page 11: Document Support
About this document ..............................................Document support For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at the following telephone numbers. From United States • If you are using a landline, a cellular phone or VoIP, dial this number: 1-888-582-3688 From other countries •... - Page 12 About this document ............................................................................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
-
Page 13: Safety And General Information
S afety and general information Overview Purpose This chapter provides a generic overview of the standard hazard symbols and statements that are currently used in Alcatel-Lucent documentation, and which may appear in this document. Contents Structure of safety statements General hazard statements... - Page 14 CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE Indicates a hazardous situation not related to personal injury..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
-
Page 15: General Hazard Statements
Contact with energized parts can cause serious injury. Work on energized equipment is only permitted if you are using insulated connection terminals, are adequately trained and follow safe work practices..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015... - Page 16 Cabinet eyebolts can break, severely damaging the cabinet, if a crane is used to lift the cabinet into an upright position. Ensure that the cabinet is in an upright position before transportation by crane..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 17 Lifting this equipment by yourself can result in injury due to the size and weight of the equipment. Always use three people or a lifting device to transport and position this equipment..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 18 • Place modules removed from the equipment on a conductive surface. • Test or handle the module only with grounded tools on grounded equipment. • Handle defective modules exactly like new ones to avoid causing further damage..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
-
Page 19: Basic Safety Aspects
• Modifications to any part of the system (including software) must be carried out by Alcatel-Lucent or by trained and qualified personnel authorized by Alcatel-Lucent. Unauthorized modifications will lead to a complete exemption from liability. Only components recommended by the manufacturer and listed in the procurement documents should be used. - Page 20 • Slots and openings in this product are provided for ventilation. To protect the product from overheating, these openings must not be blocked or covered. This product should not be placed in a built-in installation unless proper ventilation is provided ..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 21 • Never touch non insulated telecommunication wires or terminals unless the telecommunication line has been disconnected at the interface. • The ITE is to be connected only to PoE networks without routing to the outside plant..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 22 Safety and general information Basic safety aspects ............................................................................................1-10 Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
-
Page 23: Alcatel-Lucent 9962 Multi-Standard Enterprise Cell V1 Installation
As part of the Alcatel-Lucent 9360 Small Cell Solution, it can be deployed in a network supporting a mix of Home and Enterprise cells. -
Page 24: Multi-Standard Enterprise Cell V1 Antennas
..............................................Figure 2-1 Multi-standard Enterprise Cell v1 antennas Note: The 9962 MSEC v1.0 is available in a variant without the LTE B12 radio frequency. Refer to the Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 - Technical Description and Troubleshooting Guide, 3MN-02001-0003-DEZZA and the Alcatel-Lucent Small Cell Wi-Fi AP - Technical Description, 3MN-01840-0004-DEZZA for complete technical details on the 9962 MSEC v1.0 access point. - Page 25 For the safety of stored data, it must not be placed near magnetic devices such as audio or video tapes. The 9962 MSEC v1.0 emits a radio signal. The quality of coverage achieved therefore depends upon where the device is placed.
- Page 26 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Pre-installation information installation ..............................................• Ethernet and/or fiber cable, • 4p PoE compliant with PoH standard adapter, • AC to DC power adapter, • Lock, • RF antenna jumper, • GPS extension cable. Installation tools required The following is a list of the tools that may be used during installation: •...
-
Page 27: Mounting Guidelines
Mounting guidelines Introduction The 9962 MSEC v1.0 has been designed for an effective plug & play installation. The device is based on single hardware core associated with dedicated mounting kits. This topic describes the procedures to be followed when installing the 9962 MSEC v1.0 access point. - Page 28 Figure 2-2 9962 MSEC v1.0 mounting plate Mounting characteristics The 9962 MSEC v1.0 is designed to be installed using the following options: • the wall mount that requires two (2) stick antennas per 9962 MSEC v1.0 access point, ..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 29 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Mounting guidelines installation ..............................................• the ceiling mount (inside a false ceiling) that requires external antennas only. In this configuration, the antenna port isolation for external antennas is 20dB minimum. – Option 1 ..............................................
- Page 30 Packing List, immediately notify the carrier that delivered the unit and contact your Alcatel-Lucent representative. • Record the 18 digit serial number before mounting the 9962 MSEC v1.0 access point..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 31 To mount the device onto a wall, perform the following steps: ........................................Connect the RF stick antennas on the 9962 MSEC v1.0 access point. Note: The wall mount implies that the access point is vertically installed with the stick antennas pointing upwards (not downwards or sideways). The stick antennas cannot be bent.
- Page 32 ........................................Attach the 9962 MSEC v1.0 to the mounting plate as follows: 1. Line up the four (4) grooves in the back of the 9962 MSEC v1.0 with the four (4) notches protruding from the mounting plate. The following graphic shows the notches and the lock location on the mounting plate and the grooves in the back of the 9962 MSEC v1.0:...
-
Page 33: Notch, Groove And Lock Locations
Figure 2-4 Notch, groove and lock locations 2. Push the 9962 MSEC v1.0 downwards to lock it into position. 3. Then screw the four (4) screws (provided in the wall mounting kit) to attach the 9962 MSEC v1.0 to the mounting plate. -
Page 34: Mounting Plate On The 9962 Msec V1.0 Access Point
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Mounting guidelines installation ..............................................Figure 2-5 Mounting plate on the 9962 MSEC v1.0 access point S T E P S ........................................Mount inside a false ceiling - Option 1 WARNING Fall hazard Falls can occur when working at heights resulting in serious personal injury or death. - Page 35 As the ceiling mount implies external antenna use only, check that no stick antennas are mounted on the 9962 MSEC v1.0 access point. Open the cover of the antenna connectors at the back of the 9962 MSEC v1.0 to deactivate the integrated antennas related to the radio frequencies of the external antennas.
- Page 36 ........................................Attach the 9962 MSEC v1.0 to the mounting plate as follows: 1. Line up the four (4) grooves in the back of the 9962 MSEC v1.0 with the four (4) notches protruding from the mounting plate. 2. Push the 9962 MSEC v1.0 horizontally to lock it into position.
- Page 37 Mounting guidelines installation ....................................................................................... If locks have been ordered by the customer, attach the lock to secure the 9962 MSEC v1.0 to the mounting plate. S T E P S ........................................Mount inside a false ceiling - Option 2...
- Page 38 Remove the 9363 access point and its mounting plate from the ceiling tile mounting brackets: refer to the Alcatel-Lucent 9363 Metro Cell Indoor (V2 1900/850MHz and 2100MHz) Installation and Commissioning, 3MN-01121-0301-RJZZA........................................Attach the 9962 MSEC v1.0 mounting plate at the place left free by the 9363 access point..............................................2-16 Alcatel-Lucent 9962 MSEC v1.0...
- Page 39 Mounting guidelines installation ..............................................Figure 2-9 9363 access point replacement ........................................Connect the different cables to the 9962 MSEC v1.0 access point. Refer to the procedure “Cabling” (p. 2-19) for details........................................Refer to the “External antennas connections” (p. 2-24) paragraph to get details on the jumper cables used to connect external antennas to 9962 MSEC v1.0.
- Page 40 ........................................Attach the 9962 MSEC v1.0 to the mounting plate as follows: 1. Line up the four (4) grooves in the back of the 9962 MSEC v1.0 with the four (4) notches protruding from the mounting plate. 2. Push the 9962 MSEC v1.0 horizontally to lock it into position.
-
Page 41: Cabling
This topic describes the procedures to be followed when connecting the 9962 MSEC v1.0 cables. Backhaul connection Each 9962 MSEC v1.0 access point requires at least one data cable to connect the backhaul. In case of daisy chain, an additional data cable is required (refer to “Daisy chain”... - Page 42 RJ45 connector at the cut end. These cables are outdoor cables. The tables below list the fiber cables complying with the 9962 MSEC v1.0 access point: • in single mode - duplex, • and in multi-mode - duplex.
- Page 43 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Cabling installation ..............................................Order codes Description 849193503 OPTICAL CABLE / 30m / 2SM / 5.5mm / 2LC to 2LC / OFNR-LS / Breakout 80-80mm 849193511 OPTICAL CABLE / 50m / 2SM / 5.5mm / 2LC...
- Page 44 Select one cable per multi-mode duplex link. Important! Ethernet and/or fiber cables must be purchased by customers either directly to Alcatel-Lucent either to a local provider. Cable connectors The following picture shows the positions of the different physical connectors on the 9962 MSEC v1.0 access point:...
- Page 45 One of those ports provides a RJ45 slot and the second port a SFP slot. The SFP slot accepts 1000Base-X GE optical transceiver or 100/1000Base-T electrical transceiver. The table lists the SFP transceivers complying with the 9962 MSEC v1.0 SFP port : Order codes...
- Page 46 ..............................................External antennas connections The ceiling installation requires external antennas that have to be linked to the 9962 MSEC v1.0 access point with the appropriate jumper cables on the antenna SMA connectors. The table lists the jumper cables complying with the 9962 MSEC v1.0 antennas...
- Page 47 Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Cabling installation ..............................................Connect the 9962 MSEC v1.0 cables ........................................According to the on-site configuration , select the appropriate option in the following table, and perform the associated procedure: If you want to... Then ...
- Page 48 S T E P S ........................................Connect the AC-DC power adapter If you intend to use an AC-DC power adapter to supply power to the 9962 MSEC v1.0, perform the following steps: ........................................Route the power supply cable from the 9962 MSEC v1.0 to the supplied AC-DC power adapter.
- Page 49 ........................................Daisy chain The 9962 MSEC v1.0 access point can be linked in a daisy chain. Fiber links are not allowed in this configuration. The daisy chain hop is set by connecting the SFP slot of the “Master” access point to the RJ45 port of the “Slave”...
-
Page 50: Example Of 9962 Msec V1.0 Daisy Chain
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Cabling installation ..............................................Figure 2-12 Example of 9962 MSEC v1.0 daisy chain ..............................................2-28 Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015... - Page 51 A lcatel-Lucent 9962 Multi-standard Enterprise Cell v1 commissioning Overview Purpose This chapter describes the 9962 MSEC v1.0 commissioning process. The 9962 MSEC v1.0 is self commissioning in the case of single device deployments. Contents Commissioning process ..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 52 Troubleshooting Guide, 3MN-02001-0003-DEZZA Before you begin The 9962 MSEC v1.0 is intended to be installed and then left unattended so the LED pattern activated in the commissioning process is mainly focused on indicating that the installation and initial network connection have succeeded and that the access point is properly functioning.
-
Page 53: Alcatel-Lucent 9962 Multi-Standard Enterprise Cell V1 Commissioning
The access point is ready to enable applications and the Power indicator is solid green........................................The 9962 MSEC v1.0 access point starts looking for a GPS signal: the GPS LED is blinking red. Important! If GPS signal is not available, the GPS LED turns off. - Page 54 “Wi-Fi commissioning” (p. 3-5) ........................................After the 9962 MSEC v1.0 access point has been in a normal system state for fifteen minutes, all the non-Wi-Fi LEDs are turned off to avoid bringing attention to the unit. They remain off until one of them changes to an Off-Normal state. As the Wi-Fi LEDs are managed by the Wi-Fi module they are not included in this procedure but turned off in a separate procedure.
- Page 55 The 9962 MSEC v1.0 integrated Wi-Fi module manages the Wi-Fi LEDs located at the rear of the access point........................................As soon as the access point is powered on, the 9962 MSEC v1.0 starts booting and the Wi-Fi LEDs are solid on. Figure 3-2 9962 MSEC v1.0 Wi-Fi LEDs ........................................
- Page 56 Step Description State 5G LED 2G LED Power-up or reload BOOTING Solid On Solid On 9962 MSEC v1.0 access point tries to get ADOPTING Slow adopted by 9772 Wi-Fi Service Controller blinking (optional) 9772 Wi-Fi Service Controller UPGRADING Slow pushes a software upgrade...
-
Page 57: Overview
P ost-installation activities Overview Purpose This chapter describes the post-installation activities and checks. Contents Post-installation information ..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015... - Page 58 ........................................Verify that all the exterior conduit and cable connections are secure........................................Inspect the site and remove all loose tools, materials, and parts. S T E P S ....................................................................................... Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 59 United States Introduction The statements that follow are the product conformance and eco-environmental statements that apply to the 9962 MSEC v1.0 when deployed in the United States. Federal Communications Commission Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.
- Page 60 For more information regarding collection and recovery of packaging and packaging waste within specific jurisdictions, please contact the Alcatel-Lucent Field Services / Installation - Environmental Health and Safety organization. For technical support, contact your local Alcatel-Lucent customer support team. See the Alcatel-Lucent Support web site http://www.alcatel-lucent.com/support/ for contact information.
- Page 61 • ANSI ATIS-0600010.2007 Ingress protection NEMA Level 1 IP2X of IEC 60529 Operating 0 to 4000m (13 000ft) altitude Vibration Telcordia GR-63-CORE sections 4.4.4 & 5.4.2 Earthquake Richter scale 7 ..............................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 62 Product conformance statements Environmental requirements ............................................................................................Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 63 4 pair Power over Ethernet ..............................................Alternative Current AGPS Assisted GPS ..............................................Direct Current Domain Name Server Digital Subscriber Line ..............................................European Union ..............................................Giga Ethernet Global Positioning System ..............................................Home Device Manager ..............................................Alcatel-Lucent 9962 MSEC v1.0 GL-1 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 64 Radio Frequency Radio Network Controller ..............................................Service Activation Manager Small form-factor pluggable SubMiniature version A ..............................................WCDMA Wideband Code Division Multiple Access Wi-Fi Wireless Fidelity (IEEE 802.11b wireless networking) ..............................................GL-2 Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...
- Page 65 Index Numerics 9962 MSEC v1.0 installation, ............. Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 cabling, 2-19 commissioning, mounting guidelines, ............. document support, ............. environmental requirements, ............. General hazard statements, ............. Orderable items, ............. phone numbers for document support, Post-installation, Pre-installation information, Product box content, ..............................................
- Page 66 Index ............................................................................................IN-2 Alcatel-Lucent 9962 MSEC v1.0 3MN-02001-0002-RJZZA Issue 2.01 September 2015...