Table of Contents
Advertisement
3-18
C
3: S
HAPTER
Viewing Resilient Setup
With the Switch Management screen displayed, choose to set up the
module and select the RESILIENCE button.
The Switch Module Resilience Summary screen is displayed as shown in
Figure
the module.
Figure 3-7 Module Resilience Summary screen
The following read-only information is displayed:
MAIN Port The ID of the port configured as the main port for this
resilient link pair.
STANDBY Port The ID of the port configured as the standby port for
this resilient link pair.
Pair State Active/Both Failed/Unknown/Not Available The current
operating state of this resilient link pair:
Active — The resilient link pair is enabled and operating normally
with both main and standby port capable of carrying traffic.
Both Failed — Although the resilient link is correctly configured,
both links have failed. This could be due to loose connections or
cable damage.
C
WITCH
ONFIGURATION
3-7. This screen shows the current resilient link configuration for
DUA1840-0AAA01
Advertisement
Table of Contents
