3Com MSH 1005 User Manual page 85

3-24 C 3: S C
HAPTER WITCH ONFIGURATION
Community String The community string allows a very simple method
of authentication between the Switch 1005 and the remote Network
Manager. The text string can be of 32 characters or less. If you want a
Network Manager to receive traps generated by the device, you must
enter the community string of the remote Network Manager into the
trap table. The default community string is public.
Throttle To prevent a remote Network Manager receiving too many
traps at once, you can configure the Switch 1005 to transmit traps with
a delay between them. If several traps are generated at one time, they
will be transmitted with the specified delay between them. The unit of
throttle is one thousandth of a second. The default value is 100, which
gives a minimum delay of one tenth of a second between each
transmission.
DUA1840-0AAA01