C O N T E N T S General Information Limited Warranty (USA Only) Warranty Registration | Features Safety Guidelines Overview Installation DMX Setup Operation | Cleaning | Ordering Information Specifications Dimensional Drawings...
All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product.
WA R R A N T Y R E G I S T R AT I O N This device carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number.
To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ Products, LLC is not responsible for injury and/or damages resulting from the misuse of this device due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of this device and only the original rigging parts included with this device should be used for installation.
Page 8
S A F E T Y G U I D E L I N E S • For your own personal safety, please read and understand this manual in its entirety before attempting to install or operate this device. • Save the packing carton for use in the unlikely event the device may have to be returned for service.
O V E R V I E W Page Select Indicators Channel Page Select Master Faders Button Fader 5pin 3pin DMX Out DMX Out Battery Power Power Compartment Switches Switch...
I N S TA L L AT I O N FLAMMABLE MATERIAL WARNING Keep device at least 8in. (0.2m) away from any flammable materials, decorations, pyrotechnics, etc. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
D M X S E T U P DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of com- mu-nication between intelligent fixtures and controllers. A DMX controller sends DMX data instruc- tions from the controller to the fixture. DMX data is sent as serial data that travels from fixture to fix- ture via the DATA “IN”...
Page 12
2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will reduce the risk of erratic behavior. DMX ADDRESSING The DMX address for this device is set using the DMX dip switches on the side of the device, located next to the DMX ports.
O P E R AT I O N Once the SDC24 has been connected to your fixture(s) with either DMX data cables or wireless RDM, these fixture(s) can easily be operated using the controls on the SDC24. MASTER FADER - Use to adjust the output for all channels (1-24) together.
S P E C I F I C AT I O N S Features: • 8 individual channel faders and 1 master fader • 24 DMX channels • Compact, portable design • 3-Pin and 5-Pin XLR output • Battery Type: PP3 9V (not included) Control / Connection: •...
Need help?
Do you have a question about the SDC24 and is the answer not in the manual?
Questions and answers