Harbor Freight Tools Central Pneumatic 97728 Set Up And Operating Instructions Manual page 11

TO pREVEnT ExplOSIOn:
lubricate the tool only
with specified lubricants.
lubricate the air inlet
using only pneumatic tool
oil. lubricate the internal
mechanism using only
white lithium grease. Other
lubricants may damage the
mechanism and may be
highly flammable, causing an
explosion.
Maintenance, lubrication, and
cleaning
note: These procedures are in addition to
the regular checks and maintenance
explained as part of the regular
operation of the air-operated tool.
1. daily - Air Supply Maintenance:
Everyday, perform maintenance
on the air supply according to
the component manufacturers'
instructions. The lubricator's oil
level needs to be maintained and
the moisture filter must be regularly
drained. Performing routine
maintenance on the air supply will
allow the tool to operate more safely
and will also reduce wear on the tool.
2. daily - Tool Maintenance:
Apply several drops of pneumatic tool
oil into the Quick Connector of the Air
Router (if inline oiler is not used).
3. daily - Tool cleaning:
Clean the Air Router with a damp
cloth and mild detergent. Do not use
solvents. Do not introduce water into
the internal mechanisms of the tool.
SKU 97728 For technical questions, please call 1-800-444-3353. Page 11